Happy Flexi Squid, Print in Place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Happy print in place flexi squid with wiggly arms. No supports, no glue, AMS and single colour profiles.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 42
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
Say hello to the cheeriest squid on the plate. This chunky flexi squid prints in one go, fully articulated, with wiggly little arms and a big friendly grin that's impossible not to smile back at. No supports, no glue, no fuss, it comes off the bed already wiggling. It makes a lovely desk fidget, a happy shelf companion, and a proper crowd pleaser as a quick gift.
If you're new to printing, this is a great one to build confidence with, just print it flat on the plate and you're away. Two profiles are included: an AMS version for that cheeky black smile and eyes, and a Single Colour version if you'd rather a simple one plate print. Try it in your brightest filament, a neon pink or a UV green both look brilliant, and print a little shoal in different colours once you're hooked.
Filament Colour & Material
PLA is all you need, it prints easily and holds the joints nicely for a display fidget. Go bold with a neon pink or a bright green, and pair with black for the face on the AMS profile. If it's going to get handled a lot, PETG is a tougher alternative.
Print Settings
Print in place, no supports, no glue
Layer height: 0.16mm
Infill: 15%
Walls: 2 or more
Designed around a 0.6mm line width (default, initial and outer walls), so set that for best results
Two profiles included: AMS (multicolour face) and Single Colour
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: