Happy Flexi Squid, Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Happy print in place flexi squid with wiggly arms. No supports, no glue, AMS and single colour profiles.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Say hello to the cheeriest squid on the plate. This chunky flexi squid prints in one go, fully articulated, with wiggly little arms and a big friendly grin that's impossible not to smile back at. No supports, no glue, no fuss, it comes off the bed already wiggling. It makes a lovely desk fidget, a happy shelf companion, and a proper crowd pleaser as a quick gift.
If you're new to printing, this is a great one to build confidence with, just print it flat on the plate and you're away. Two profiles are included: an AMS version for that cheeky black smile and eyes, and a Single Colour version if you'd rather a simple one plate print. Try it in your brightest filament, a neon pink or a UV green both look brilliant, and print a little shoal in different colours once you're hooked.
Filament Colour & Material
PLA is all you need, it prints easily and holds the joints nicely for a display fidget. Go bold with a neon pink or a bright green, and pair with black for the face on the AMS profile. If it's going to get handled a lot, PETG is a tougher alternative.
Print Settings
Print in place, no supports, no glue
Layer height: 0.16mm
Infill: 15%
Walls: 2 or more
Designed around a 0.6mm line width (default, initial and outer walls), so set that for best results
Two profiles included: AMS (multicolour face) and Single Colour
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: