Gravefang Totem, Undead Orc Bone Shrine | 32mm & 75mm Fantasy Terrain | FDM & Resin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Death Shamans carve symbols into the bones and bind fragments of ancestral memory into the shrine.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Gravefang Totem is a grim monument to the tribe’s dead, built from bone, scavenged armor, carved timber, and the remains of enemies whose defeat became part of Gravefang legend.
Raised near stronghold entrances, ritual grounds, and important battlefield sites, these shrines serve as both spiritual markers and warnings. Gravefang warriors believe the spirits of fallen ancestors linger around the totems, watching over the living and feeding strength into those who fight beneath their shadow.
Death Shamans carve symbols into the bones and bind fragments of ancestral memory into the shrine. Before battle, warriors often touch the base of the totem, smear ash or blood across its surface, and ask the dead for strength. Some swear they can hear faint whispers when standing near one at night.
To outsiders, the Gravefang Totem is little more than a grotesque pile of skulls, bone, and crude tribal craftsmanship.
To the Gravefang, it is sacred ground.
The Gravefang Totem works beautifully as scatter terrain, a ritual objective, stronghold decoration, battlefield marker, cursed shrine, or atmospheric centerpiece for dark fantasy encounters. Multiple copies can also be used throughout a Gravefang settlement to create a strong visual identity across the entire battlefield.
Perfect
for resin or FDM
printing, this model offers crisp,
painter-friendly detail and a dramatic silhouette—ideal for
tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly
elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use
the following settings for reliable, high-detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti-Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.