Search results: 75mm

Counting matching models…

PrintablesOerga

Gridfinity 3.175mm (1/8") Endmill Holders

Gridfinity holder for 1/8" and 3.175mm endmills. Gridfinity endmill bin 1x2: 20PCs Gridfinity endmill bin 1x1: 11PCs Max endmill lenght: 38mm

Downloads: 40
Likes: 8
Rating: 0

Order a print of this model

PrintablesN8finch

Shelf Support Bracket 175mm Thicker

I made this specific for my cat bed perch. The cutout is made to fit my cat wall half hexagon cat bed. This is the link to the store I ordered my cat wall bed and shelving from https://rshpets.com/en-us . I highly recommend them! I did a…

Downloads: 19
Likes: 5
Rating: 0

Order a print of this model

PrintablesPhilip

Abflussgitter Pool 175mm

Nachdem das Abflussgitter gebrochen war habe ich es etwas dicker nachgezeichnet. Passend für 175mm Abfluss

Downloads: 6
Likes: 0
Rating: 0

Order a print of this model

Printables

75mm Small Magnetic Cable Arch

Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…

Order a print of this model

Printables

Bicycle saddle height measurement tool - "75mm point" remix of cmh's 80mm version

Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…

Order a print of this model

Printables

Pipe Clamp – Single Double & Triple (10-75mm)

Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…

Order a print of this model

Printables

Schott vial holder - 10ml, 22.75mm diameter - 3x3

This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.

Order a print of this model

Printables

PrusaSlicer Settings for Miniatures (MK4, 0.25mm nozzle, 0.075mm layers) (Updated June 2026)

I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…

Order a print of this model

Printables

75mm pipe holder

Tight wall-mount for various 75mm piping, for example: - plastic drain piping - heat recovery ventilation flexible piping First insert the M3 nuts into the base (use a pliers to snap in), and attach the base to the wall with two wall…

Order a print of this model

Printables

teste pour vis de 2.80 mm 2.75mm 2.70 mm

the best tester for 2.80 mm 2.75mm etc screw

Order a print of this model

Printables

PaK 40 75mm anti tank gun

The gun elevates and rotates within the approximate range of the actual gun. I don't recommend any raft or brim. All the holes and edges will require some trimming. See photos for assembly. The assembly begins with the base 1. Attach the…

Order a print of this model

Printables

1.75mm Extruder/Feeder upgrade for Ultimaker 2, 2+, 2+ Connect 3

This is the Extruder/Feeder from the Ultimaker 2+, which I’ve reinforced and slightly modified. The extruder housing has been upgraded by removing the original arm axle and replacing it with a threaded hole for an M5 countersunk bolt.…

Order a print of this model

Printables

1.75mm Duel XY Printer Carrier Hat for Ultimaker 2, 2+, 2+ Connect

Just a quick and simple replacement carrier hat to enable 1 extra bowden tube and smaller holes for the choice of using threaded or non threaded tube camps for 4mm bowden tubes. Enjoy Category: 3D Printer Parts

Order a print of this model

Printables

Dosendeckel/ can lids 75mm

Deutsch Dieser 3D-druckbare Deckel ist leicht nach innen geneigt, sodass er sich zuverlässig auf der Dose verkeilt und stabil sitzt. Im Unterschied zu vielen Standarddeckeln, die leicht wegstehen oder nach oben rutschen, hält dieses…

Order a print of this model

Printables

Spraypaint Number Stencils 75mm

Order a print of this model

Printables

1.75mm Filament dust filter [2.87g - PLA]

Filament dust filter Print-in-place hinges and a reusable snap-fit lock. 1.2mm walls. Weight [Sunlu Matte Gray PLA] Instructions: Fill each of the container's halves with tightly packed filtering media; cotton, a sponge, fabric, or any…

Order a print of this model

Printables

Universal 75mm Cylinder Holder Workshop Organizer

Wall-mounted cylindrical holder. Originally designed as a custom dock for the Atenge Electric Duster (Atengeus) , can also be used as a storage solution for spray cans, small bottles, or any cylindrical tool. Technical Specifications:…

Order a print of this model

Printables

Flying Squirrel 75mm FPV Frame — TPU Bits

TPU parts for the Flying Squirrel 75mm FPV frame. Includes everything you need to complete your build — camera canopies, flight controller cover, battery pads, and battery straps. All parts designed to work with the 2mm carbon fiber…

Order a print of this model

Printables

coupling, cap for flex air pipe 75mm/Spojka a zátky pro hadici vzduchotechniky 75mm

Spojka a zátky pro hadici vzduchotechniky 75mm

Order a print of this model

Printables

HSW 170x75mm shelf

Remix of Coolbruhs big shelf but now with nobs so it actually clicks into the HSW.

Order a print of this model

Printables

Small VESA Mount for Modular Mounting System (75mm & 100mm)

This mount allows you to mount devices with 75mm or 100mm VESA pattern using Modular Mounting System components. NOTE : This is only a 3d printed part and not intended to hold heavy displays. Make sure your application is reasonable…

Order a print of this model

Printables

6 Ramekin (75mm) Holder

This is a ramekin holder for up to 6 75mm ramekins. I got tired of how they don't stack well. I printed at 10% infill and the front two uprights can easily flex to pull the ramekins out of the front if needed. Easy to pick up and set on…

Order a print of this model

Printables

Cup Cover for Plant Propagation - 75mm Cup (Chinet 10oz)

Designed to aid in the propagation of plants by allowing easy placement within cups, this cover fits a standard 75mm cup and was modeled on a Chinet 10oz Crystal Cup we picked up at Costco. It should scale a few mm each way Printed with…

Order a print of this model

Printables

Insert with larger vehicle slot 175mm x 80mm

Englarged to fit my custom bodies SCX30

Order a print of this model

Printables

USB stick gridfinity holder (24.75mm)

This is a holder compatible with the gridfinity system that holds 3 usb sticks in a horizontal position. Made with a height of 24.75mm so that it sits flush with all my other gridfinity bins.

Order a print of this model

Printables

Golf - Putting Aid - Adjustable Putting Gate (50 - 75mm)

Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…

Order a print of this model

Printables

Elegoo Centauri Carbon 2 Spool Adapter (73mm - 75mm)

Print Settings Printer: Elegoo Centauri Carbon 2 Slicer Profile: Stock / Default Settings Material: PLA (Stock temperature/speed) Layer Height: 0.2mm (Standard) Walls/Infill: Default (Stock) Supports: No (Designed for clean printing…

Order a print of this model

Printables

Articulated Basketball Fidget - 75mm Print-in-Place

🏀 Articulated Basketball Fidget This is a fully articulated, "print-in-place" basketball designed for tactile feedback and stress relief. At 75mm , it fits perfectly in your hand and features deep, high-contrast seams for a realistic…

Order a print of this model

Printables

dog food can lid 75mm

dog food can lid 75mm Dog food cans come in different sizes. Lids are available in 76 mm, but they don't fit. Unfortunately, the can was 75 mm! So, design it yourself, print it, try it until it fits. Weighing only 7.5 g, the lid uses…

Order a print of this model

Printables

Yet Another Dehydrator Extend-o-ring (275mm dia. trays)

Got too lazy to find one that fit my tray and my ender3 print bed so i just made one instead. Fits 275mm dia. dehydrator trays and most filament spools. If your spool is extra girthy, just scale the model about the z axis :) Made the ring…

Order a print of this model

Printables

Frame for 6V 5W 175mm x 175mm glass solar panel

Frame for: https://pl.aliexpress.com/item/1005008792084226.html Need: 8 x m3 + 1 x m5 screws and nuts 3M Vhb TAPE

Order a print of this model

Printables

Xiaomi Instant Hot Water (Mijia) tray height extension (45mm & 75mm)

To help it not splash, reusing the original drop tray cover plate. Recommended to print in PETG or ABS or something else High temperature. Modelled by a Human in Autodesk Fusion

Order a print of this model

Printables

Magnetic Quick Disconnect for MMU PTFE Tubes 8mmx1.75mm magnet

MMU PTFE Magnetic connection for an enclosure, quick connect/disconnect. This is for a different size magnet: 8mm x 1.75 I remixed it because I had a bunch of these magnets. I also created a "clamp" which you can slide over the connection…

Order a print of this model

Printables

75mm EDF for A2212

This is a remix of Nikodem Bartinik's Toroidal EDF . It is designed for an A2212 motor and the fan blade has been modified to fit the included hardware. I took off the rotor from the motor to make it easier to assemble. You can find an…

Order a print of this model

Printables

Hydrometerhalter Geeetech 75mm

Hydrometerhalter für Geeetech Spulen 75mm Innendurchmesser der Halter ist zum einfachen einlegen in Geeetechspulen er rastet nicht ein, sprich er ist perfekt für das lagern in Vacumbeuteln.

Order a print of this model

Printables

Vesa 75x75mm external drive mount for mini pc (Dell Wyse,etc)

you have to add tree support as described on the picture

Order a print of this model

Printables

Gridfinity box for aidB Eurobox UTZ Rako 400x300 x 120&75mm

Box erhöht, damit Kleinteile bei geschlossenem Deckel nicht aus den Boxen fallen können.

Order a print of this model

Printables

75mm Chinese Diesel Heater Quick Connect Duct System

I developed this series to address the limited options for diesel heater ducting components. While I came across similar concepts, I couldn't find anyone offering a quick-connect, quick-release design with a cap. I printed these parts in…

Order a print of this model

Printables

Bag Clips Print in Place V2 50-175mm increasing steps 25mm

Nearly 2 years ago I created print-in-place bag clips. They work fine. But every thing can break (after a while). My printed models work great for rather some time (months) but eventually tend to break at the 2 small parts of the closing…

Order a print of this model

Printables

MTG Modular Magnetic Counter Remix for 2.75mm x 10mm magnets

I took BilboX_289296's creation and 123d file and converted it to work with Fusion 360. I then modified the models to work with the magnets I had on hand which were 2.75mm by 10mm. Printed on a MK3S 0.2. Use supports for the Base module.

Order a print of this model

Printables

Vice mounted Brake Pipe Bender - 4.75mm

A series of concentric, formed diameters for mounting in a bench vice to allow perfect bends in copper brake line. I recceomend splitting in half for support free printing.

Order a print of this model

Printables

Sattel-Lehre 75mm / Saddle adjustment gauge 75mm

Mit dieser simplen Lehre kann an Fahrradsätteln (vorzugsweise Rennrad, Gravelbike, MTB) die sogenannte "biomechanische Referenzlinie" bei 75mm Breite bestimmt werden. Bei einigen Sätteln (wie dem abgebildeten kommerziell 3D-gedruckten…

Order a print of this model

Printables

Small Monitor Stand (75mm VESA Mount)

This 3D-printable stand is designed for small portable monitors that support a standard 75mm VESA mounting pattern. It provides a stable and minimal footprint solution for desks, workstations, or travel setups. The stand securely attaches…

Order a print of this model

Printables

Screw-In Filament Clip - Robust Design - 1.75mm - 1 Gram Print - Filament Holder

A new filament clip design. Rather than clipping on to the side of the spool, this clip is held on by two M3 screws. Highly recommended to print with .08 layer height for hole accuracy. Instalation: Using the printed clip as a template,…

Order a print of this model

Printables

Easy printable flower pot size: 72mm x 72mm x 75mm

easily printable flowerpot for seedlings, I recommend printing with a height difference to implement the possibility of water absorption into the clay. Print without the bottom and top layers so that a honeycomb filling is created there…

Order a print of this model

Printables

Ducting Y-Connecter - 75mm/3.5in

WHY? I recently purchased a new printer and now need to vent two, to the outside. So I created this Y-connector with a wall to close the two intakes off from each other, to prevent back-flow from one appliance/printer to the other. HOW?…

Order a print of this model

Printables

75mm Tripple thread 1/4 turn textured container

This 3D printable storage container features a secure screw-on lid 1/4 turn easy on easy off Designed for both style and practicality, the threaded lid provides a snug, reliable seal to keep contents safely stored. Perfect for organizing…

Order a print of this model

Printables

Driptray for 62mm and 75mm tea filter

I wanted to put the filter of my teapot somewhere so it can drip and dry off between brews, so I made this. Fulfills its purpose perfectly. Should you have a filter with a different diameter, it's easy enough to adjust the model. Feel…

Order a print of this model

Printables

75mm雨どい連結パーツ

最近ホームセンターで取り扱いがなくなってしまった75mmの雨どいを連結するパーツです。市販品のパッチン軒継手と同様に2つの雨どいを連結してくれます。 STLモデルは最小になっており、利用するフィラメントでテスト印刷して雨どいにフィットするかどうかチェックしてください。必要なら全体的に縮小/拡大を行ってください。テストがOKであればスライサーでモデルを必要なサイズまで伸ばし、ネガティブオブジェクトで穴をあけてください。…

Order a print of this model

Printables

Vertical Holder for Raspberry Pi 5 for VESA 75mm mount with Snapfit case camera flex hole

Vertical remix of the Raspberry Pi 5 holder mount for VESA 75mm + Snapfit case with hole for camera flex

Order a print of this model

Printables

Bag clips 50mm, 75mm, 100mm, 125mm and 150mm print in place

[UPDATE: New, stronger version here: ] [Older version below] Print in place bag clips 50mm, 75mm, 100mm, 125mm and 150mm. No supports needed. Just print, take it from the buildplate/heatbed and use. Mine are printed with PETG 0.6mm…

Order a print of this model

Printables

M6x75mm bolt for Miniature Vice 2.0

About: So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it. Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head…

Order a print of this model

Printables

DIY fishing lure - crank bait 75mm

~75mm crank bait in 4 pieces with wight/sound chamber. Print the following pieces 1 x Left 1 x Right 2 x Pin Add wire to hold hooks, glue, ad the right size hooks and go catch the big ones! and to add the extra toch, paint it in your…

Order a print of this model

Printables

Can Lid with or without hole 75mm cans

Why my mom needed a lid for there catfood Print in TPU (might work with pla, not tested) no support 2 walls 10% infill

Order a print of this model

Printables

Behälter aus HT-Rohr (50/75mm)

Deckel und Kappe 50mm und 75mm HT-Rohre. Vielseitig einsetzbar z.B. für Schaschlik spieße

Order a print of this model

Printables

Blast Gate for 50 and 75mm / Schieber für HT50 und HT75mm

Hi, these Blast Gates is for 50mm and 75mm tubes. The four holes have 6mm diameter. Hallo, dieser Absperrschieber ist für HT50 und HT75 Rohre. Die vier Löcher haben einen Durchmesser von 6 mm. Update 10.01.2024 The thickness of the slider…

Order a print of this model

Printables

2020 and 2040 75mm Raised Legs for AM8 Upgrade

Use it, Spread it, Remix it! This 2020 Attachment adds 75mm tall legs. These legs allow me to get under my printer to keep my work space clean. Print with legs upside down. Print Settings Initial Layer Height: 0.15mm Layer Height: 0.2mm…

Order a print of this model

Printables

75mm low-profile pill case.

75mm diameter pillbox for travel, camping, personal use. Print using food-safe PLA etc. Note that the image is of my smaller case: https://www.printables.com/model/524384-3-compartment-travelcamping-pill-case

Order a print of this model

Printables

Lenovo M93P custom 75mm Mount

custom 75mm Mount for Lenovo M93P / M900

Order a print of this model

Printables

Flymo Onboard Cable Clip for model Easi Glide 300V or others with bar diameter 21.5mm and cable diameter 6.75mm

I've always like Flymo lawnmowers and this is our current one. The weak spot though is the onboard cable clip which is supposed to hold the cable that runs between the grip switches and the motor. Usually after mowing I notice the cable…

Order a print of this model

Printables

Runout Sensor for MK8 Extruder 1.75mm (same of Tevo Tarantula)

A functional Runout Sensor to fits with MK8 Extruder for filament 1.75mm, just print and use it. You need enable it in firmware, I used Marlin 1.1.9, My board is MKS Base 1.4, this mainboard came with my Tevo Tarantula. This changes work…

Order a print of this model

Printables

XYZ / XY 25mm/50mm/75mm/100mm calibration tool

This model contains two calibration-files for your printer: -one for XY-calibration, -one for XYZ-calibration. Each model contains measurement points from the origin axes at 25mm/50mm/75mm and 100mm for all axes. The corners are rounded…

Order a print of this model

Printables

Modular Tinywhoop Stand for 65mm, 75mm and 85mm drones

I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…

Order a print of this model

Printables

Open 6X17 V6 separated STLs for Fujinon SWD 75mm f5.6

I decided to take the .step files and piece out all the components for the V6. The lens cone is specifically for the Fujinon SWD 75mm f5.6 lens. You will need to print a different lens cone if you do not have that exact lens.

Order a print of this model

Printables

Mini Filament Runout Sensor for 1.75mm

You just need additional: - Omron Sensor like in the Picture or similar - 2x M3x6 and 2 Nuts - 2 pieces of 1.75mm Bowden

Order a print of this model

Printables

75mm/3inch Angle Grinder Disc Box

Designed a simple pocketable box for 75 mm/3 inch angle grinder discs. It fits 9-10 discs depending on their thickness. The central post nicely secures the dics. To assemble the box, you will need 6 pcs. M2x15 screws. WARNING: If you want…

Order a print of this model

Printables

Seedling Station for DN75 (75mm) HT Pipes - Setzlingsstation für DN75 (75mm) HT Rohre

EN: Seedling Station for 75mm HT Pipes This is my seedling station for 75mm HT pipes. This seedling station is designed for the hydroponic cultivation of seedlings. Hydroponic means that soil is completely avoided, and the roots of the…

Order a print of this model

Printables

Kitchen Sink Basket - 225 x 175mm

Designed this for my kitchen sink. Included you can get the Solidworks and STEP files to allow easy remix and editing the dimensions for your sink size.

Order a print of this model

Printables

Mini traffic cone 75mm

75mm tall 50mm wide added three part version for simple color changes while slicing

Order a print of this model

Printables

Vesa Laptop Mount (100mm & 75mm)

VESA Laptop Mount for 100mm and 75mm compatible vertical mounts. Total Laptop supported widths: VESA 100mm -> 415mm width max-> 285mm min VESA 75mm -> 390mm width max-> 260mm min Print with at least 4 wall layers. If you find this Thing…

Order a print of this model

Printables

75mm VESA Mount with 1U Arm

I use this model to mount a small 8 in. monitor to my server cabinet. Updated 04/03/2025: Tolerance around hinge updated to prevent fusing between parts for print in place model. Included the original file for print in place in case…

Order a print of this model

Printables

Skadis - 75mm long hook

Skadis - 75mm long hook with a little handle for easier removal Uses two slots

Order a print of this model

Printables

Modular Edge System (MES) - 75mm Clamp

75mm clamp remix

Order a print of this model

Printables

RC plane 75mm wheel chock

Order a print of this model

Printables

VESA Monitor Handle 75mm with cable holder

I kept lugging around a monitor in the flat everytime i changed the place where I worked and remove it after a day's work. I need something to carry it properly and also be able to organize the cables. Printed it in black ASA with 0.35mm…

Order a print of this model

Printables

LED Display Vesa 75mm Mount Stand

Combine with photo frame metal support to mount onto led display with vesa 75mm mount

Order a print of this model

Printables

Ornament Bell 75mm

A 3D printable Ornament Bell for Christmas and other holidays designed to be printed in “vase” mode in approximately one hour. The object consists of two parts which can be easily 3D printed, without any support, on a modern inexpensive…

Order a print of this model

Printables

Circle Brush holder - 80, 120, 175mm tall - two sizes

There are two sizes of circular brush holder available for download. It is of course possible to adjust the height in any way, the default heights are 120mm and 175mm for the large circular holder (diameter 175mm) or 80mm and 120mm for…

Order a print of this model

Printables

Hachidorii 75mm duct V2

Decided to go a complete different direction and based the duct on a ¼ round of a circle. The neat part about this duct design I've included a slot to tie down whip antennas. Let me know if there are any changes or updates.

Order a print of this model

Printables

75mm Small Magnetic Cable Arch

Order a print of this model

Printables

Bahtinov Mask for 175mm diameter telescope

This model is a size modification of this original mask on Thingiverse (from maker Diisaster ) 184mm outer diameter to fit an inside telescope diameter of 175mm. Fits a Sky-Watcher SkyMax 150

Order a print of this model

Printables

Auto Rewind Spool Holders centering Adapter 51-75mm (Geeetech)

Filament spool centering ring / adapter ring from 75mm to 51mm, for MMU Auto Rewind Spool Holders.

Order a print of this model

Printables

Cap for can diameter 75mm

EN: Just another of the many lids for 75mm cans. Printed in PETG, layer height 0,2mm, 2 perimeters, no supports. CZ: Prostě jen další z mnoha víček na plechovky o průměru 75mm. Vytištěno z PETG, výška vrstvy 0,2mm, 2 perimetry, bez…

Order a print of this model

Printables

3"/75mm Sanding Pad/Disk Handle

This is a handle for the common 3"/75mm sanding disk. Print it in different colors to distinguish the different grinding grits. There is a 0.2 layer inside the handle, so no supports are necessary. Just use a drill to remove it after…

Order a print of this model

Printables

Dehydrator Extension 75mm w/ Thermometer/Hygrometer Mount

I got a cheap food dehydrator from Amazon to dry filament. I didn't want to destroy the trays in case I ever want to actually dehydrate food. I printed a model off here that was supposed to be for the same model. It didn't quite fit. It's…

Order a print of this model

Printables

Sparta Praha vykrajovátko 75mm

Vykrajovátko cukroví fotbalového týmu Sparta Praha

Order a print of this model

Printables

div. VESA Adapter 75mm-100mm

Diverse Adapter für Monitore VESA Halterungen. 75x75 Lochbild für M4 vorbereitet. 100x100 für M4 Einschmelzmuttern (d6mm t 5mm)

Order a print of this model

Printables

Tiny Whoop fleet storage solution 65mm 75mm

Store up to 4 standard size 65mm whoops (or 5, it's possible to slide one more into the center). Includes an additional compartment with optional insert to separate batteries into two groups. This compartment can also be used to store…

Order a print of this model

Printables

Bicycle saddle height measurement tool - "75mm point" remix of cmh's 80mm version

Order a print of this model

Printables

Finger Chopsticks - Longer Remix 75mm

Remix of https://www.thingiverse.com/thing:4850806 with longer sticks

Order a print of this model

Printables

Filament holder (1.75mm)

Contains a total of 8 models (only for 1.75mm filament): Filament holder for 15mm , 16mm , 17mm , 18mm , 19mm and 20mm desk. + a wall bracket and a separate piece for custom installation. It's my first public model, so I apologize in…

Order a print of this model

Printables

vesa 75mm bins

vesa 75mm basket for storing various thing behing the monitor include 2 sides basket for more storage

Order a print of this model

Printables

Bear Cutter 75mm

Bring joy to your baking with this adorable teddy bear cookie cutter! Designed for 3D printing, this cutter creates charming, teddy bear-shaped cookies with ease. Its smooth, continuous edges ensure clean cuts, while the simple yet…

Order a print of this model

Printables

Pipe Clamp – Single Double & Triple (10-75mm)

Order a print of this model

Printables

ORC BEHEMOOTH 75mm scale - FREE

At Necro Punks Miniatures, we specialize in crafting highly detailed, attitude-packed miniatures and immersive 3D-printable scenarios designed for your tabletop adventures. Exciting News! We're thrilled to launch our store, and to…

Order a print of this model

Printables

Cow Cookie Cutter 75mm 85mm

Cow Cookie Cutter. Cutter is designed for around 1/4" or 6mm thick Dough/Cookies We used food safe brushes, and food coloring 75mm 85mm

Order a print of this model

Printables

Samsung monitor vesa adapter 75mm, 100mm holder

Mounting system on vesa 75mm x 75mm or 100mm x 100mm for samsung standing monitor without vesa holder Printed in PLA recomended infil between 50%-100% depends on pattern, on 0.2mm layer height

Order a print of this model

Printables

Mr Beam hose adapter for 75mm pipe (DN65)

A adapter for Your Mr Beam exhaust hose, to connect it to any pipe with outer diameter of 75mm like an DN65 (german waste water pipe). Check if it fits tightly to make a good connection and doesnt leak exhaust gases while in use. I…

Order a print of this model

Printables

Camera Eyepiece M19x0.75mm

According to kamerastore, an original Nikon 2925 fits the following camera models: Nikon F, F2 (w/ DE-1, DP-1, DP-2, DP-3, DP-11 & DP-12 finder), F3 (w/ DE-2 finder), Nikkormat, FM, FM2, FM2N, FM3A, FE, FE2 & FA Fujifilm X-Pro 1, GS645…

Order a print of this model

Printables

Wheels set with tire 75mm

Wheels set with tire. Made for small models 75mm. The tire need to print in soft TPU.

Order a print of this model