Filament Clip 1,75mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another filament clip. This one has been designed to be as simple and convenient as possible.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 253
- Makes
- 6
- Views
- 731
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
The hole for the filament is slightly larger so it's easy to clip onto the filament, especially when you press the ends together.
When put onto the spool the clip presses down on the filament and results in a very firm grip in which the filament can hardly slide at all.
Due to the bigger hole, the clip is quite loose when not attached to a spool. Because of this you can just keep the clip on the filament during printing as the extruder has no trouble pulling the filament through the clip.
No more loosing the clip while printing or fiddeling around, trying to get the clip on a loose end again. I also noticed that the clip is very good at removing any dust from the filament when left on while printing.