M6x75mm bolt for Miniature Vice 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Took the Miniature Vice 2.0 75mm bolt and added M6 nut instead of shifted rectangle at the end
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 129
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
About:
So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it.
Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head (shifted rectangle) and thus different knob, and I just did not want to print the knob again.
I combined the bolt with M6 nut and that's all.
Please give a like and post makes and provide comments for further improvements.
Print:
Set 100% infill, print vertically if possible.
Photos from PETG 0.20mm
Post-Processing:
Depending on the print quality you may need to use a bit fo sand paper to trim the sides of the bold so it fits the knob.