1 / 6
Utility Blade Filament Cutter 45° (1.75mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament cutter using a standard utility blade to cut filament at a 45° angle for loading.
- Rating
- 4.375 / 5
- Likes
- 58
- Downloads
- 264
- Makes
- 9
- Views
- 1,393
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Printing
- No supports needed
- Print top pieces flat and bottom piece standing up as seen in STL files
Materials
- 2 springs from ballpoint pens (preferably at least 22mm length, 4mm diameter)
- 1 utility blade (Example)
Assembly
- Insert blade in top piece
- Ensure blade is all the way down and place cover piece over blade
- Insert springs in bottom piece - may need tool to assist with this
This was inspired by this model from Pomi which uses 18mm snap-off blades.
