10 Degrees Perfect Logitech Keyboard Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy 10° keyboard stand with secure hooks, triangular locking geometry, and adjustable positioning
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 106
- Makes
- 3
- Views
- 874
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The 10 Degrees Perfect Logitech Keyboard Stand is a sturdy, minimalist keyboard stand designed around the Logitech MX Mechanical.
The stand raises the keyboard into a comfortable 10° typing position while keeping it securely supported. Its triangular locking structure provides a rigid base, while the integrated front and rear hooking geometry keeps the keyboard securely positioned during normal use.
The design uses two matching 3D-printed stands, supporting the keyboard across its width without permanently modifying it.
Key features
10° typing angle for a comfortable elevated position
Two-piece stand design for stable keyboard support
Triangular locking geometry for increased rigidity
Secure hooking to help prevent the keyboard from sliding
Adjustable positioning to accommodate different setups
Non-destructive — no drilling, screws, or permanent keyboard modification
Designed around the Logitech MX Mechanical
Lightweight but structurally reinforced
Designed for common FDM 3D printing
Shown in Silver Silk PLA for a clean metallic appearance
The design is intended as an ergonomic positioning aid for people who prefer a raised keyboard angle or need additional control over keyboard placement. It can also be useful for adapting a workstation to different typing positions.
The contest allows ergonomic supports, typing-elevation stands, and positioning aids as valid directions for the MX Mechanical challenge.
Installation / Use
Print two stands.
Place the stands on a stable, level desk surface.
Position them beneath the Logitech MX Mechanical.
Engage the keyboard with the integrated hooks.
Adjust the spacing/position of the two stands to match your setup.
Check that the keyboard is fully seated before typing.
No permanent modification to the keyboard is required.
Printing
Recommended starting settings:
Material: PLA / Silk PLA
Layer height: 0.20 mm
Perimeters: 4
Top layers: 5
Bottom layers: 5
Infill: 25%
Infill pattern: Gyroid or Grid
Supports: None if your slicer confirms the model prints cleanly in the supplied orientation
Brim: Not normally required
Nozzle: 0.4 mm
First layer: 0.20 mm
Print speed: Normal/standard-quality profile
For Silver Silk PLA, use the temperature range recommended by the filament manufacturer and make sure the first layer is well adhered.
Because the stand is intended to support a keyboard, use sufficient walls/perimeters rather than relying only on high infill.
Compatibility
Designed specifically around the Logitech MX Mechanical keyboard geometry. Logitech provides official simplified CAD reference files for the MX Mechanical, which are intended to help designers develop compatible add-ons.
Keyboard not included.
Files
Include:
STL — ready to slice
3MF
STEP — editable source
Any additional CAD/source format used to create the model
The contest specifically requests an editable source such as STEP, Fusion 360, OpenSCAD, or Onshape.