Counting matching models…
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
Cable duct / cable management for desks The cable guide can be created in any length! To be printed: The upper end for screwing under the table top. The foot as the lower end. The narrow frame under the foot to create space for e.g. a…
This is a remix of @Beaver's original and @Gugowski's remix: This is mostly @Beaver's original design, but made more narrow like @Gugowski's <25mm idea (great idea btw!) I liked @Beaver's cable management orientation better so left that…
Headphone holder for desks with small edges If you can't find a headphone holder that clips on your desk because the edge is too small, this headphone holder is designed for desks with about a 15 mm (0.6 in) usable edge. The thickness of…
Quadlock Deskstand for a small or medium device with a Quadlock mount
The original model could fit desks up to 40 mm thick, which was way more than I needed. So I shortened it a bit and now it can only fit desks thick less than 25 mm. The pros are: - Reduced printing times. - Should be more durable thanks…
A simple support for using the standard Apple magsafe charger
I required a movable access point and decided to create my own desk stand for an Ubiquiti Unifi nanoHD access point. Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : NO In-fill Percentage : 20% Required:…
a simple lil deskstand for your Digimon. brick-pendulum-DMmini. blank or with a hatching digitama.
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Simple cable organizer designed to clip onto IKEA Langkapten desks and Kallax shelves. It helps to keep your cables in place and your setup a bit cleaner. The model was made in Blender using the CAD Sketcher add -on. If you want to edit…
SmallFormFactor.net forum post Design features Smaller than original DeskMini case Increased cooling performance across all components Decreased noise/turbulence More aesthetic choices Filler options for de-soldered VGA systems (see…
Changes from the original: Profile now 18 mm to accommodate thinner desktop. Screw holes for secure mounting, sized for self-tapping M3 screws. Six cable version: Three holes for thinner cables, three holes for thicker cables.
Headphone clamp I remixed to fit my oddly shaped and sized desks with metal lips under the table top. Feel free to tinker: https://www.tinkercad.com/things/c4UuxmYVIJR-headphone-clamp-for-60mm-desks Print instructions Printer Brand: Prusa…
Very easy to print in any filament, print in place. Perfectly sized to exactly fit one sandwich sized ziploc bag. Easily use on a desk, in your car, or elsewhere to have a trash can wherever you need it. Keeps the ziploc bag open for easy…
This is a vertical stand to hold 2 HP EliteDesk 705 G4 DMs next to each other. It also is a parametric FreeCAD Model. I think it might work for other models possibly in the EliteDesk/Pro Desk line but it may require modification of the…
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
This is a simple desktop stand designed specifically for the SharkRF M1ke handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
This is a simple desktop stand designed specifically for the Motorola MOTOTRBO R7 and DP4800 handheld ham radio. (It might fit more radios from this product line.) The stand holds the device at a 12° backward tilt to improve visibility of…
This is a slightly remixed version of the original design by rin_ofumi requested by one of the makers in the discussion. The top of the grip has been pre-tensioned and lenghtened.
I modified the clamp for much slimmer desks up to around 30mm thick. Can now be printed on the Prusa Mini!
A cup holder that can hold plastic water bottles, soda cans, and 20oz soda bottles. Also with the included 3d printable screw you can latch it to the side of your desk. Credits to @Beaver for making the screw part. Also giving credits to…
Headphone Holder for Ikea Bekant desks. Requires no glue as the part is friction fit into the table. Over time the part may get a bit loose, a tiny piece of double sided tape can be used to securely attach the part to the table. The…
Deskside small trash bag holder for throwing out trash every day. Size can be easily adjusted in Fusion CAD, for now I don't know how to make it more available for adjustment online though. A M4 countersunk flat head screw + a M4 heat…
This is a headset stand that clamps onto your desk. I have not printed the model, as I do not have a 3d printer yet, but if you do decide to print this model, please rate it and upload a photo of the model. Any feedback is highly…
🔧 Features: Consists of 5 parts for the main arch, designed for easier printing Includes 5 diffuser pieces (recommended to print with translucent filament) Internal channel for routing LED strip and wiring Sturdy bases for stable…
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
I designed this cable chain for my Flexispot E7 standing desk with tinkercad. The main idea is to provide an easy to use way to organize multiple cables (e.g. power, monitor, speakers, …) in one chain. Compared to the classical cable…
A deskstand for Jabra Evolve2 85 wireless headsets. Print settings Material: PLA or PETG Layer height: 0.20 mm Supports: Yes
This is a simple desktop stand designed specifically for the Tidradio H3 handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
Desktop Cable Tidy! So a quick and easy model I made. Still getting into the swing of modelling so this is all new for me. I know there are a few cable Managers online for this sort of thing but I wasn't a fan of the Long large ones. I…
Print with preferably triangular infill at 20-30 percent. No supports, build adhesion, but may be ironed. Can be printed with PLA
I remixed this model to fit my ~ 17.6mm desk. I made the desk piece 18mm and I opened the opening for cables by a couple of mm to reduce the likelihood of breaking when you are inserting the cable. The first print had a problem with…
A Digivice Color desk stand inspired by Takoza_1002118's Vpet Deskstand, created from the ground up to match the aesthetic. It also works for the original 1999 Digivice, and I assume it works for the Ver. Complete but I haven't been able…
This is a simple desktop stand designed specifically for the Yaesu FT-70DE handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
Deskside small trash bag holder for throwing out trash every day. Size can be easily adjusted in Fusion CAD, for now I don't know how to make it more available for adjustment online though. The 1-clamp version is a bit unstable and…
Hinged Cover for Rubbermaid Medium Deskside Wastebasket 2956. There are two models, one for attaching the lids with 3mm screws or self tapping bolts, and one with 3D printed locking pins. I'm using one of each. The base is snap-fit, but…
A quick remix from Gizmotoy's clever design to make use of 12mm x 3mm magnets I had on hand. As in the original design, two initial layers seems to be a good balance between print strength and magnet holding power. Included is a .gcode…
This is a simple desktop stand designed specifically for the Yaesu FT-65 and Yaesu FT-4X handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is…
It's the STL Version of Model: 792989 It originaly was a 3mf and can't be sliced and printed on every printer. Now: Converted via Orca slicer to STL sliced for Anycubic Kobra 2 Plus in Highspeed with PLA ----- Es handelt sich schlichtweg…
Sliding drawer for desks: ‘Structural front’ Always on the lookout for new ideas, I’ve taken an interest in a practical accessory: ‘the desk drawer’. But just because something is practical doesn’t mean we shouldn’t pay attention to the…
This phone stand not only keeps your device at a comfortable viewing angle but also allows you to charge it while in use. Ideal for desks, it makes video calls, browsing, and daily use more convenient without taking up extra space. 🔹…
I'm getting a new XLR mic and needed to raise this up so I made this stand! Print instructions Unassociated tags: Arctis Pro + GameDAC, Arctis Pro GameDAC Category: Gadgets Summary I'm getting a new XLR mic and needed to raise this up so…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I use a standing desk when I work and for long-term…
I love the base design by rin_ofumi , but I had a thicker table. The only reasonable solution was a remix! The grip has been lengthened to 60mm and incorporates the pre-tensioning adjustments made by D.R.racer . Print Guidelines…
Let the cutest evolution starter light up your space! This Eevee Sitting LED Lamp captures the charm of this beloved Pokémon in a calm, cozy pose. 🧡 Key Features: Calm sitting pose with gentle smile Multicolor printing or filament swap…
Tired of having water bottles roll around the classroom? Install a few of these around and you'll quickly find your classroom more quiet and organized.
This is a simple cable chain to protect the cables on standing desks. The chain has been modelled in FreeCAD and can be easily adapted to your needs. If you like this design, please consider leaving a ♥heart. Thanks! ----------…
I needed TPU casters/pads for the Tresanti desk so that it does not slip on wood floors. I designed this to be a perfect fit. Print in TPU with 100% infill.
I created the cable holder in three different sizes. 5mm, 10mm and 15mm. It's easy to increase the distance. I used 2 magentes per cable holder. The diameter is 8 mm and the height is 3 mm. I used these here There is no tolerance for the…
Spline Cable Organizer for Stand-up Desks Keep your cables neat and organized with this custom 3D-printed cable management solution! This cable organizer features a modular, spine-like design made up of two main parts: Anchor Link Piece –…
Sliding drawer for desks: ‘Structural front’ Always on the lookout for new ideas, I’ve taken an interest in a practical accessory: ‘the desk drawer’. But just because something is practical doesn’t mean we shouldn’t pay attention to the…
This is a simple desktop stand designed specifically for the Motorola MTP6650 TETRA handheld ham radio. (It might fit more radios from this product line.) The stand holds the device at a 12° backward tilt to improve visibility of the…
A stand to set the rithum swith on your table or cabinet
Electrically adjustable standing desks have the problem that desktop computers can't really be placed on a side table, or under the table, as then the cables will create problems, adjusting the desk up and down. Placing the computer on…
Summary I wanted a headphone mount for my nightstand, but the only ones I could find either weren't in the form-factor I wanted, didn't fit well or used too much material. So I designed my own! The top of the mount is angled a bit to…
A place to hold your ear plugs, safety glasses, and gloves all in one place, while keeping the gloves off the desktop if you get them dirty! Adjustable clamp for desks up to 1.5 inches thick. Note: Be careful when tightening screw to hold…
A cable tidy to be screwed to the back of a desk for cable management. There are two hooks, one for power and one for data. Print on its side. Supports required just for the two screw holes. I printed in PLA+ at 15%.
This is a simple desktop stand designed specifically for the Yaesu FT-3DE handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
Small, modular wire-tray with integrated wire organizers for standing desks. This is all printable on a Prusa mini but requires additional hardware to assemble (see McMaster-Carr manifest below). Fits desks up to 3.7cm thick using…
Simple headset holder for weird desks like mine. Designed in 2 parts to fit around the edge. Opening can clamp around desks that are 120mm tall x 40mm wide. Parts can be attached together using 2 M4x12 or 14 bolts. Printed using PETG, no…
iphone 12 mini mount for GrandMA2 lighting desks
This is a simple desktop stand designed specifically for the Motorola MOTOTRBO SL1600 and SL2600 handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model…
This desk shelf leg was design to be compact and easily installed on any plank you have around. It is inspired as a smaller version of the the G-LABO model. Product Size (per leg): W: 21 mm D: 124 mm H: 68 mm Screw holes are dimensioned…
Grommet that fits on fully.com standup desks in order to attach the Ikea wireless charger Printed on 0.2 black PLA. If printed upside down wont require any supports
This is a balance board for standing desks. This helps to keep moving a little bit while standing and working. The only thing needed are 3 or 5 cups. If you want to balance completely free, the 2 outer cups can be removed. For the center…
Perfect gift for the tech in your life. Inspired by https://www.printables.com/model/922649-did-you-open-a-ticket-it-quote-lightbox , still printing on the ole Creality Ender Pro 3, so I wasn't able to use Multicolor that model required.…
Welcome to Dave's INF~ Modular Cable Management System Unlock the potential of a pristine, organized environment with our modular cable management system. Perfect for seamlessly concealing wires in server racks, beneath desks, and within…
I needed a way to attach my Hornady Primer Bottle to my desk leg but wanted something a bit more elegant then just using Velcro. This is a 2-part piece that prints without supports. My desk legs are 2" square but the model should be able…
I'm getting a new XLR mic and needed to raise this up so I made this stand! Category: Gadgets
I wanted to get things off my nightstand, to make it clean and organized. I knew I wanted the ability to add new things later, and I didn't want anything to be permanent. the idea of rearranging things was also appealing. So I designed a…
This holder can clamp onto a thin table or desk and hold a wireless keyboard. This holder is specifically designed for the Logitech MX Keys S keyboard, and should accommodate keyboards of similar dimensions and weight. The holder can fit…
AVlabs AV-DESKSC MK I Sound Card Holder I hated having my soundcard on top of my PC, or under my monitors. So I designed a little shelf that just “slots” on top of a monitor. It features a little border that can be clipped to the main…
Made my first Model ever in Fusion. Designed for Macbook pro to stand next to Ikea basta shelf https://www.thingiverse.com/thing:2360532 screen at the same Level like my additional Monitors. Sorry for the poor printquality, first filament…
I needed a tray to store my cables under the desk. The tray is hinged (you can either use a hinge on each side, mounted with one or two screws, or use the double hinge in the middle if you install several). to have nice side clips just…
Color change is at layer 40 if you want the leaf to be a different color from the text. Uploading this file in case anyone wants the attached stand.
Holder for a StarTech.com Mini Dual 4K Monitor Thunderbolt 3 Dock with DisplayPort + Ethernet (TB3DKM2DP) dock. This holds the dock to the side of the desk. Which gets around the problem of the stupidly short thunderbolt cable on the…
A Surface Dock Desk Mount to be used with OnyxHat's Surface Dock Harness.
Slide it over the edge of a desk or table and hang a backpack, handbag or headphones underneath. The clamp grips a little tighter than the desk, and the hook curls away from the desk so the bag hangs clear of your knees. DETAILS • The…
This print is made of 3 parts. The middle part fits flat on the heat bed of the mk4s. Measurements height: 14cm leg width: 2 cm, top: 3 cm depth: 13 cm, top 15 cm…
Not much to it, little mod to serve my purpose better.
You will just need 4mm wood screws. It allows you to more permanently place the printer on example given (e.g.) wood
Slip on bracket to add 10cm to an Ikea desk. Held in place either with double sided tape or just the weight of objects on top it. Prints without support in PLA or PETG. I use it to support a sheet of acrylic and extend desk into wall…
Just screw it in in one of the remaining free places under the desk (uses avaiable holes already there) using some M4 1cm screws. Should be compatible with most joypads (in my case a 8BitDo 2C)
Tired of your charging cables falling off the desk? This simple and robust cable organizer clips directly onto the edge of your desk, holding up to 3 cables securely in place. It is designed with a 25mm gap to fit standard desk…
I couldn't find a headphone hanger that simply clamps onto the desk edge and still sits firmly when the desktop isn't evenly thick – so I designed FlexHook. How it works A leaf spring printed into the lower jaw pushes up against the…
A DM Kiwami deskstand inspired by Takoza's Vpet Deskstand, created from the ground up to match the aesthetic. The DM Kiwami is a custom V-Pet made by Dokodemo Devices:…
Really liked the project of deposition sound https://www.printables.com/model/853874-fdmgeo-loudspeakers-by-deposition-sound but I wanted to have the speakers more on ear level and reduce the needed space in combination with the amp, so I…
Inspired by Desk Cable Management Hugger Clip @viktori Screwless cable management for 2,5 cm / 1 inch desks Keep audio and electrical cables separated, or have more space for USB/electrical cables. Modeled in Onshape
A simple 1/4 deskstand. I used it for my t.bone MB 7 Beta microphone as a simple desk stand.
Print with Suports! if you want any different variants for different spools, just leave a comment!
So, this Model has many errors. I made it in one sitting. I also had to sitch to freecad. Now I don't have the time to fix it. I generally am really lax with lizence. I will for now set a licence. If this is a issue, just contact me and…
Print sideways so as to need no supports!
It's a disk that goes over the tip of the "screw" so that it does not fall back out when the panel is opened.
Secure Headphone Hanger for Ikea Desks A sleek and secure headphone hanger that attaches directly to your IKEA desk by using the screws that fasten its legs. It is designed to be nice to your headphones with soft, rounded corners, and a…
Motorola DP4600e radio mount designed for installation in a car using two M5 screws. Please do NOT print using PLA; use only PETG, ABS, ASA, etc.
It's a disk that goes over the tip of the "screw" so that it does not fall back out when the panel is opened.
Gummi (TPU) Lauffläche für Schreibtische mit Holzrädern Das Holz Rad hatte einen Innendurchmesser von 19,6 cm (Die Holzränder sind dann knapp unter dem TPU Ring) Bei minimal abweichenden Maßen, sollte ein verkleinern (oder vergrößern) im…
Really liked the project of deposition sound https://www.printables.com/model/853874-fdmgeo-loudspeakers-by-deposition-sound but I wanted to have the speakers more on ear level and reduce the needed space in combination with the amp, so I…
This is a headset stand that clamps onto your desk. I have not printed the model, as I do not have a 3d printer yet, but if you do decide to print this model, please rate it and upload a photo of the model. Any feedback is highly…
