Hinged Cover for Rubbermaid Medium Deskside Wastebasket 2956 garbage can/bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged Cover for Rubbermaid Medium Deskside Wastebasket 2956.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 62
- Makes
- 0
- Views
- 921
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hinged Cover for Rubbermaid Medium Deskside Wastebasket 2956.
There are two models, one for attaching the lids with 3mm screws or self tapping bolts, and one with 3D printed locking pins. I'm using one of each.
The base is snap-fit, but you can also glue it. I have one that I glued before I added the snap catches, but am also using one with the snap-fit without any glue.
Print Notes:
Choose screws or pins style for attaching the lid, then print:
- 1 of each base section
- 2 lids
- 2 sets of pins
I printed with a 0.4mm nozzle, but 0.6 should also work.
Supports are required when printing the base pieces, which should be printed top down.
Supports are optional for the lid, however the handle prints cleaner with enforced supports.
The hinges are print in place and do not require supports. Be careful when enabling supports for the lid that they are limited to the handle, or use blockers on the hinge. The hinge pins are cones and default supports may interfere.