Science Olympiad Boomilever 2026-2027 Division C Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a jig for 2026-2027 Science Olympiad Boomilever event. This one jig would work for both bonus and non-bonus.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
Science Olympiad 2026-2027 Boomilever Division C Bonus and Non Bonus Jig
This is the Division C Boomilever building jig. The backplate includes 2 mounting holes which could be used for both Bonus design and Non Bonus Design with only one set of jigs. To build a Bonus (10 cm) boomilever, mount the bolt assembly on the lower hole. To build a Non Bonus (15 cm) boomilever, mount the bolt assembly on the upper hole.
The hardware includes:
1* Connector Bolt, 1/4-20 x 2.36 inches (60 mm) long, with a 0.66-inch (17 mm) diameter head and 0.78 inch (20 mm) unthreaded section
2* Hex Nut, American National Standard, 1/4 — 20, 0.23-inch-thick maximum
2* Flat Washer, USS 1/4 inch, approx. 3/4 inch outside diameter x 0.09-inch-thick maximum
Link to purchase these hardware
The jig includes:
1* Division C Assembly Jig
1* Division C Large compression Jig
1* Division C Small Compression Jig