1 / 5
Grundfos Pump JB Cover — image 1
1 / 5

Grundfos Pump JB Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Grundfos pump motor junction box cover. Old ones are brittle PPE and you can't find replacements for them. Viola.

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

This pump was on a jacket water heater circulation pump. The cover cannot be bought separately, and they tend to be very brittle. This cover slides on nicely and has no distortion. The center screw hole aligns with the existing hole. 

I would print in either PETG or ASA, probably ASA/ABS if you have it available. 

You don't need supports, but with the radius, you might get some layer line distortion. You can either tune it out in the slicer with variable layer height, use supports, or just go with it. I just went with it since I wasn't going for perfection, and needed to mass produce these. 

Tags