1 / 4
Jonah Whale - Press the Blowhole to Open the Jaw — image 1
1 / 4

Jonah Whale - Press the Blowhole to Open the Jaw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Press the blowhole and the whale opens its jaw to reveal a tiny diver. One support-free print.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Press the blowhole. The whale's lower jaw drops open and reveals the diver inside. Push the jaw back up and it clicks shut.

This is one print-in-place toy, 97 × 48 × 28 mm. The download contains one STL with three captive bodies: whale, jaw and button. Keep them together as one object in the slicer. The diver is attached to the jaw and does not come out.

Print

  • PLA or PETG, 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill.

  • Print with the belly on the bed and the button up, as oriented in the STL.

  • Supports off. A 3 mm brim helps hold the tail flukes.

  • Do not scale down. The hinge has 0.28 mm radial and 0.45 mm axial clearance. Use 0.1–0.15 mm elephant-foot compensation so the first layer does not close the hinge gaps.

First use

  1. Press the blowhole button firmly once to break its 0.3 mm sacrificial print gap.

  2. Work a thumbnail along the 0.5 mm slit on each side of the lower jaw if the first layer has skinned over it.

  3. Press the button to open the jaw. Push the jaw up until its latch clicks to close it.

The button, latch and hinge may need one firm cycle to loosen after printing. The diver stays attached to the tongue.

Small moving clearances and a thin tail make this a handled desk toy, not a toy for young children.

Tags