Rotating Hybrid Stickends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stickend printed around a NSK 693ZZ 3x8x4 bearing to make it easyer not to regripp.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Print in LW TPU, Insert a 3x8x4 Bearing with a print pause at the unsuported overhang. Use a M3 Hex Screw and bolts as a Stick.
Bearings: NSK 693ZZ 3x8x4
For best results only print one piece at a time or use the "sequential" function.
Print the lower part containing the bearing at a non foaming temperature and higher extrusion factor. Transition the Temperature and extrusion factor to max foaming over a couple layers, starting 3 layers after the bearing insertion using the layer gcode.
M221 S95 for Extrusion Multiplyer
M104 S225 for Hotend Temp.