1 / 6
Ultra-Minimalist 3DBenchy IKEA SKÅDIS Holder (<1g / Spool End Saver) — image 1
1 / 6

Ultra-Minimalist 3DBenchy IKEA SKÅDIS Holder (<1g / Spool End Saver)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ultra-lightweight IKEA SKÅDIS hook for standard 3DBenchy. Uses just 0.92g (<1 meter) of filament and prints in 10 mins.

Rating
0 / 5
Likes
10
Downloads
17
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Ultra-Minimalist 3DBenchy IKEA SKÅDIS Hook (<1g Spool Saver)

Have a tiny scrap of filament left at the end of a spool that isn't enough for a real print? Don't throw it out—turn it into a display hook for your 3DBenchy benchmark fleet!

Designed around absolute minimalism, this hook weighs just 0.92 grams, consumes only 0.31 meters of filament, and prints in under 10 minutes.

Features

  • Sub-1g Filament Usage: Uses less than a single meter of filament—the ultimate "end-of-spool" project.

  • Clean Floating Look: Snaps cleanly around the standard 3DBenchy smokestack / chimney to hold the boat securely without bulky shelves, cradles, or brackets visible underneath.

  • True IKEA SKÅDIS Fit: Designed specifically to slide directly into standard SKÅDIS oval slots with a solid friction-retention tab.

  • Zero Supports Needed: Lays flat on its side directly on the build plate for 100% support-free printing and optimal layer alignment along the hook arms.

Print Stats & Slicer Settings

  • Filament Used: ~0.92 g (0.31 m)

  • Print Time: ~5 – 10 minutes (depending on machine speeds & filament type)

  • Orientation: Lay flat on the flat side on the build plate (as shown in the slicer screenshot).

  • Supports: None (zero supports needed).

  • Layer Height: 0.20 mm (Standard).

  • Walls / Perimeters: 2 to 3 walls (at this size, 3 walls will make it nearly 100% solid for maximum strength).

  • Material: PLA, PLA+, PETG, or ABS (whatever leftover scrap you have on your spool).

Installation

  1. Insert the rear tab into the desired IKEA SKÅDIS pegboard slot and slide downward until it rests flush.

  2. Slide the smokestack of your 3DBenchy into the front snap-fit ring.

Tags