FlowTray Series – Jewelry 7 | Stackable Jewelry Organizer With Lids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackable jewelry organizer with four ring channels, three compartments and an optional full-size felt template.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Organize rings and small jewelry with the FlowTray Series – Jewelry 7.
The layout combines four long ring channels with three larger compartments for earrings, bracelets, pendants and other accessories. An optional full-size SVG cutting template is included for adding your own felt liners.
### Features
- Four long channels for rings and narrow jewelry pieces.
- Three larger compartments for jewelry and accessories.
- Optional A4 SVG felt-cutting template.
- Rounded internal corners.
- Stackable with all organizer trays in the FlowTray Series.
- Single-piece tray with no assembly, magnets or additional hardware required.
### Dimensions
- Overall size: 168 × 118 × 22 mm.
- Four ring channels: 13.4 × 113.2 mm each.
- Three jewelry compartments: 100 × 36.13 mm each.
- Nominal wall thickness: 2.4 mm.
- Nominal base thickness: 4.8 mm.
All dimensions are nominal. Rounded corners reduce the usable area for rectangular objects. Ring fit depends on the shape and width of each item; compatibility with specific jewelry is not guaranteed.
### Optional felt liners
The included SVG template is sized for A4 output and provides nominally 0.6 mm clearance from the corresponding compartment edges. Print the template at 100% scale, measure the 50 mm reference line and test the shape with paper before cutting felt. Felt and adhesive are not included.
### Stacking
The underside locates inside the rim of the tray below, allowing different FlowTray Series layouts to be combined in one stack.
Remove rings or other objects that extend into the stacking area before placing another tray on top. The trays are gravity-stacked and centered by their geometry; they do not use a snap-fit or locking mechanism.
### Suggested print settings
- Orientation: flat base on the build plate, compartments facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve stacking compatibility.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source and optional SVG felt template. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit depends on your printer, filament and print settings. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how the jewelry layout and stacking fit work for you.