Spool Holder Extension for Prusa Core One/+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer to move the spool holder out of the spool cavity of the Core One/+ to allow for spools that do not fit inside.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 0
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I had one of the now discontinued Buddy3D multi-kilo spools that are wide rather thick so they did not fit inside the Core One/+'s spool cavity on the side of the printer so I made this extension part to move the spool holder out of the cavity allowing the spool to sit outside the printer without needing a freestanding spool holder or anything like that.

The extension screws into the printer from the inside of the printer like the standard spool holder normally does. It does have an additional hole at the bottom of the support arm to secure the support arm so if you want to support that you will need to drill one additional hole in the printer. However, I suspect you could get away with not doing that as the arm will still lean against the side panel and transfer the weight either way (it might rattle though so I would still suggest at least using double sided tape or something to hold the support arm to panel).

Note the extension has the same mounting hole layout as the standard spool holder at the end for mounting a spool holder to. However, the normal spool holder would not mount to this without modification as it is designed to have the screws pass through the side panel and then into spool holder's holes. Whereas this is designed to have screws pass through the spool holder then into the extension. So kind of the opposite mounting.

You could potentially modify the model to have space to inside screws from the extension side to mount the spool holder normally but I feel like it would be quite fiddly to do. Personally I combined this with the Telescopic Spool Holder by MaikyX and just modified their model to have holes punch through so it can work with the extension. Unfortunately they have not allowed remixing etc so I cant share the files but an image is below to hopefully illustrate what I mean.
