Gridfinity Bin 1x2x3 - Modular Storage Organizer, Support-Free
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard 42mm Gridfinity 1x2x3 storage bin with magnet pockets and stacking lip. Support-free.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A sturdy open-top storage bin on the standard 42 mm Gridfinity grid. Sized at 1 x 2 grid units and 3 units tall, it drops onto your baseplate and swallows desk clutter, screws, USB sticks, and small parts — printed support-free with the base flat on the bed.
FEATURES
- 1 x 2 Gridfinity footprint (41.5 x 83.0 mm outer on the 42 mm grid), 21 mm tall (3u)
- 2.2 mm walls, 5 mm base, single open compartment
- Standard Gridfinity underside: grid recess per cell plus 4 square 6.5 x 6.5 mm magnet pockets (2.2 mm deep) per cell for optional 6 mm magnets
- Stacking lip around the top rim with a 45-degree underside chamfer so bins stack and nest cleanly
- 45-degree interior floor fillet: stronger than a sharp corner and easy to clean out
PRINTING
- Orientation: open side up, base flat on the bed
- Supports: none
- Material: PLA or PETG
- Layer height: 0.2 mm; Walls: 3+ perimeters; Infill: 15-20% gyroid
WHAT'S INCLUDED
- gridfinity-bin_1x2x3.stl - the bin, ready to slice in print orientation (base on bed, open side up)
IMPORTANT - PLEASE READ: This design was created in CAD only and has NOT been physically test-printed; all images are renders. Clearances are deliberately conservative, but please print a small test piece first if fit matters for your use.
