1 / 2
Gridfinity Bin 1x2x3 - Modular Storage Organizer, Support-Free — zdjęcie 1
1 / 2

Gridfinity Bin 1x2x3 - Modular Storage Organizer, Support-Free

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Standard 42mm Gridfinity 1x2x3 storage bin with magnet pockets and stacking lip. Support-free.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

A sturdy open-top storage bin on the standard 42 mm Gridfinity grid. Sized at 1 x 2 grid units and 3 units tall, it drops onto your baseplate and swallows desk clutter, screws, USB sticks, and small parts — printed support-free with the base flat on the bed.

FEATURES

- 1 x 2 Gridfinity footprint (41.5 x 83.0 mm outer on the 42 mm grid), 21 mm tall (3u)

- 2.2 mm walls, 5 mm base, single open compartment

- Standard Gridfinity underside: grid recess per cell plus 4 square 6.5 x 6.5 mm magnet pockets (2.2 mm deep) per cell for optional 6 mm magnets

- Stacking lip around the top rim with a 45-degree underside chamfer so bins stack and nest cleanly

- 45-degree interior floor fillet: stronger than a sharp corner and easy to clean out

PRINTING

- Orientation: open side up, base flat on the bed

- Supports: none

- Material: PLA or PETG

- Layer height: 0.2 mm; Walls: 3+ perimeters; Infill: 15-20% gyroid

WHAT'S INCLUDED

- gridfinity-bin_1x2x3.stl - the bin, ready to slice in print orientation (base on bed, open side up)

IMPORTANT - PLEASE READ: This design was created in CAD only and has NOT been physically test-printed; all images are renders. Clearances are deliberately conservative, but please print a small test piece first if fit matters for your use.

Tagi