Extruder Gear Spinner V3
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.05 – €0.06 net (excluding VAT)
For file: Extruder Gear Spinner-Gear_V3_0.2mm_PETG_MK3S_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 2.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An Extruder Spinner with an entrapped, continually falling gear! Version 3
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 46
- Makes
- 1
- Views
- 714
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Remix of my earlier version, slimmer, lighter, better looking.
Print one of each part.
Use Material of choice.
0.20 Layer height.
Glue 8mm x 3mm or thicker magnet to back. I use 2 of these.
Place Gear inside. The topside (beveled edge) of the gear will be naturally slightly rough from printing and want to be placed towards the motor/bottom plate, the hint of filament sticking up from the last layer wipes minimizes friction and static attraction of 2 flat faces rubbing on each other. (I had 2 of these running for weeks and after a while one would stick, going round and round. The only difference between the 2 was the direction of the gear, once flipped it never stuck again.)
Snap on Face. May need a hint of glue.
Enjoy a visually stimulating extruder spinner!
Provided .3mf and .gcodes are for PETG. Parts have individual files in case you want different colors.
The face of the bottom model I've made all perimeters, gives it a pleasant subtle effect, best seen in the pink picture.