Extruder Gear Spinner V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,05 € – 0,06 € netto (bez VAT)
Dla pliku: Extruder Gear Spinner-Gear_V3_0.2mm_PETG_MK3S_3m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,05 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 2,4 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
An Extruder Spinner with an entrapped, continually falling gear! Version 3
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 714
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of my earlier version, slimmer, lighter, better looking.
Print one of each part.
Use Material of choice.
0.20 Layer height.
Glue 8mm x 3mm or thicker magnet to back. I use 2 of these.
Place Gear inside. The topside (beveled edge) of the gear will be naturally slightly rough from printing and want to be placed towards the motor/bottom plate, the hint of filament sticking up from the last layer wipes minimizes friction and static attraction of 2 flat faces rubbing on each other. (I had 2 of these running for weeks and after a while one would stick, going round and round. The only difference between the 2 was the direction of the gear, once flipped it never stuck again.)
Snap on Face. May need a hint of glue.
Enjoy a visually stimulating extruder spinner!
Provided .3mf and .gcodes are for PETG. Parts have individual files in case you want different colors.
The face of the bottom model I've made all perimeters, gives it a pleasant subtle effect, best seen in the pink picture.