Ikea Varmblixt Lamp Glas Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.25 – €7.63 net (excluding VAT)
For file: Lampe V2.5_0.2mm_PETG_COREONE_5h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.94 excluding VAT (range midpoint).
- Weight reported by the author
- 136 g
- Print time reported by the author
- 5.02 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Four part replacement for Varmblixt Lamp glass - for print with transparent PETG
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
My son broke the glass cover of a Varmblixt lamp... This is a replacement, to be printed in four parts, with transparent filament, e.g. PETG.
I printed the parts standing upright (less supports needed, print time 4h vs. 8h laying down), on a Prusa Core One+, with 3 perimetes and 100% linear infill (since the infill is visible from the outside - to make it look homogeneous. Use support enforcers to have supports only at the base.
It is possible to print all 4 parts on one bed at once (at least with my printer), then print time is about 16h.