Ender 3 Pro Pressfit Filament Detector Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable attachment for mounting a compatible filament detector on an Ender 3 Pro.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A printable attachment for mounting a compatible filament detector on an Ender 3 Pro. It helps create a cleaner, more secure sensor installation while keeping the filament path accessible.
Print guidance
Use PETG, ABS, ASA, or another heat-tolerant material if it will sit near a warm enclosure or printer components.
Print with 3 to 4 perimeters and 20% or more infill for a durable mounting part.
Test-fit the sensor, mounting hardware, and filament path before committing to a long print.
Installation
Confirm the detector and printer configuration match your setup.
Mount the attachment without pinching the filament or sensor cable.
Manually feed filament through the path and confirm the detector triggers correctly.
Recheck fasteners after the first few prints.
Included files
STL, 3MF, and editable Fusion 360 source.
License and safety
This model is shared under CC BY-NC-SA 4.0. Commercial use requires permission from the creator. Print, install, and use at your own risk. Verify fit and suitability for your application before relying on a printed part.