Helium Hotspot Mount Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable mounting plate for a Helium hotspot setup.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A printable mounting plate for a Helium hotspot setup.
Print guidance
Use PETG, ASA, or another material suited to the planned environment.
Print with 3 to 4 perimeters and 20% or more infill.
Installation
Confirm your hotspot dimensions, mounting-hole pattern, cable routing, and ventilation needs.
Confirm that power and antenna connections are not strained after mounting.
Planned package: STL, 3MF, and editable Fusion 360 source will be added before publication.
License and safety
This model is shared under CC BY-NC-SA 4.0. Commercial use requires permission from the creator. Print, install, and use at your own risk. Verify fit and suitability for your application before relying on a printed part.