1 / 4
Simple Phone stand (tripod compatible) — image 1
1 / 4

Simple Phone stand (tripod compatible)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple 3D-printed phone holder with standard 1/4-20 UNC thread that fits most tripods.

Rating
0 / 5
Likes
2
Downloads
8
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

This is a simple 3D-printable phone holder with a standard 1/4-20 UNC thread that fits most tripods.

The phone holder can be used as a phone mount for a Tripod to take prictures/videos.

Alternatively it can be used with a small tripod for phone calls or for watching videos.

Parts

  • 1x Bottom_bracket

  • 1x Top_bracket

  • 2x Connecting_rod

  • 1x Adjustment_screw_short

  • 1x Adjustment_screw_long

  • 2x Rubber_protector

  • 1x Rotating_connector

  • 1x Stand_bottom

  • 1x Stand_top

  • 1x Stand_protector

Additional Hardware:

  • 1 Rubber band

  • Tripod with 1/4-20 UNC thread

Assembly

  1. Slide the rubber protectors onto the top and bottom brackets.

  2. Slide the stand protector onto the bottom stand.

  3. Press the two connecting rods into the top bracket and slide the rods into the holes on the bottom bracket.

  4. Hook the rubber band into the hooks on the back of the top and bottom bracket (double up the rubber band if needed).

  5. Screw the rotating connector onto the back of the bottom bracket.

  6. Connect the top part of the stand to the bottom one with the long adjustment screw.

  7. Connect the Bracket assembly to the stand assembly with the short adjustment screw

Usage

To adjust the rotation of the holder, unscrew the back screw a little bit and rotate the bracket. Then tighten the screw.

To adjust the angle of the stand, unscrew the screw on the side a little and tilt the stand. Then tighten the screw.

Tags