Silent Steel Boltlok Suppressor Vise Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vise block for Silent Steel Boltlok suppressors. Grips the rear flats and teeth so you can open the front cap safely.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
A vise block for opening the front cap of a Silent Steel Boltlok suppressor. The block fits over the rear mount end and locks onto the flats and the castellated teeth, so the suppressor can't rotate while you break the cap loose. You clamp the block in the vise, not the tube. That gives you solid torque resistance with no risk of crushing or marring the body.
Features
Engages the rear flats and teeth of the Boltlok mount, so there's no clamping load on the tube
Holds against high breakaway torque on stuck caps
Protects the finish from vise jaws
Prints without supports
Print settings
Material: ABS (PLA and PETG work too)
Walls: 8
Top/bottom layers: 9
Infill: 100%
Supports: none