1 / 4
Stencil Numbers 0–9 – Spray Paint Stencils (Bridged, Reusable) — image 1
1 / 4

Stencil Numbers 0–9 – Spray Paint Stencils (Bridged, Reusable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ten 60 × 80 mm number stencils with proper stencil bridges, for house numbers, bins, crates and workshop marking.

Rating
0 / 5
Likes
2
Downloads
22
Makes
0
Views
54
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

A full set of number stencils 0–9, each on a rigid 60 × 80 mm sheet. The enclosed parts – the middles of 0, 4, 6, 8 and 9 – are held by short straight bridges, like classic stencil lettering, so nothing falls out and the sheet doesn't flex under a brush.

Need other sizes, letters or your own logo?

Type any word or number, or upload an image – free, no sign-up, runs in your browser:

https://3dmakerbench.com/stencil-generator

Files

  • stencil-number-0 … stencil-number-9 – one STL per number

Tips

  • Print flat, as the files come – no supports.

  • PETG copes better than PLA with solvent-based spray paint and repeated use.

  • Tape the stencil down and use several light coats so paint doesn't bleed under the edges.

Print settings

  • Layer height: 0.2 mm (sheet is 1.2 mm thick)

  • Walls: 3

  • Infill: 100% (it's thin)

  • Supports: none

  • Material: PETG or PLA

Made with 3D MakerBench – free, browser-based 3D printing generators.

Tags