Stencil Numbers 0–9 – Spray Paint Stencils (Bridged, Reusable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ten 60 × 80 mm number stencils with proper stencil bridges, for house numbers, bins, crates and workshop marking.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A full set of number stencils 0–9, each on a rigid 60 × 80 mm sheet. The enclosed parts – the middles of 0, 4, 6, 8 and 9 – are held by short straight bridges, like classic stencil lettering, so nothing falls out and the sheet doesn't flex under a brush.
Need other sizes, letters or your own logo?
Type any word or number, or upload an image – free, no sign-up, runs in your browser:
https://3dmakerbench.com/stencil-generator
Files
stencil-number-0 … stencil-number-9 – one STL per number
Tips
Print flat, as the files come – no supports.
PETG copes better than PLA with solvent-based spray paint and repeated use.
Tape the stencil down and use several light coats so paint doesn't bleed under the edges.
Print settings
Layer height: 0.2 mm (sheet is 1.2 mm thick)
Walls: 3
Infill: 100% (it's thin)
Supports: none
Material: PETG or PLA
Made with 3D MakerBench – free, browser-based 3D printing generators.
