1 / 4
CC2 Aux Fan 45° Deflector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deflector for the "Assistance" fan in the Elegoo Centauri Carbon 2.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 1
- Views
- 152
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Elegoo Centauri Carbon 2 Aux/Assistance Fan 45° Deflector
Redirect airflow directly down to the print bed. Helpful if you run the fans after prints to assist in cooling the build plate.
Do NOT point this model upward to direct air towards the top. The print head may collide with it!
To install, just clip in. When pointed down and inserted all the way, it should not get in the way of the print head.
PETG or better material recommended, as PLA can creep over time and may warp due to chamber heat.
CC2 Aux Fan Deflector Changelog:
2026-09-23
initial release
tested, (mostly) functional design
Created from scratch using FreeCAD.