1 / 9
Mercedes SLR320 convertible top compartment lid — image 1
1 / 9

Mercedes SLR320 convertible top compartment lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Repair for a mercedes slr320 convertible top compartment lid PETG or "better" since its used outdoors

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Repair i made for a colleages r320

Printed "upright" so the layer lines enclose the original metal shaft and there is no delamination - see screenshot of recommended orientation
you just need some kind of binder, i used 2-part composit glue for its strength

Steps:

  1. prepare the broken part by filing down the old hookd and then cleaning the area of all the plastic dust

  2. liberally apply glue to both the original car part as well as the 3d print

  3. glue it together an apply some pressure

  4. adjust the part so it fits perfectly

  5. let it dry out to full hardness (my composit took around 24h)

  6. if needed you can apply some glue to the edges to reinforce further

recommended print settings:

  • if possible without cooling for maximum strength

  • 0,1mm layer hight

  • 100% infill

  • support: required

Remixing/improvement welcome => fusion file attached

Tags