1 / 6
Overengineered Shelf Bracket - 200x40x260mm — image 1
1 / 6

Overengineered Shelf Bracket - 200x40x260mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a massively overengineered shelf bracket. It's been FEAd and should support more than 30kg static load.

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I needed a wall mount and I wanted to flex some CAE muscles I haven't used in a while.

I present to you, this massively over-engineered shelf bracket.

It has been run through FEA with an approximation of both PC Blend and ASA's printed strength and it should happily accommodate a 28kg static load per bracket, assuming your wall can handle that.

Recommended settings:

Perimeters: > 3

Infill: > 15% Gyroid

Layers: Thick

Orientation: Side

Material: ASA/PC Blend (PETG is strong enough but will probably creep over time)

Obviously, I'm not warranting the strength of this bracket or your wall. Test it yourself carefully before you put anything valuable on it and for the love of the gods, don't stand on it. Use at your own risk.

 

Tags