SCURA workshop version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera files used in the camera workshop at printed hub 2026
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This is are the camera parts for the 3d printed pinhole camera built at the workshop at printed hub 2026.
Recommended print settings:
Print in black PETG, be careful to test that it is light tight after 2 or 3 layers. Otherwise light leaks may occur.
There is need for minimal support on the main body parts and the knobs.
The verneers to beautify the camera are found here:
Apart from the printed parts you need:
1x M4x25 cap screw (DIN912)
8x M3x12 cap screw (DIN912)
4x M3x45 cap screw (DIN912)
12x M3 hex nut
1xM4 hex nut
Some super glue to keep the nuts in place and secure the pinhole to the body.
Pinhole 0,2-0,4mm on a metal plate 14mm diameter
Lightseals (dxf/svg coming soon)
35mm/135 Film!