50 models
This is a replacement plastic lighthead mount for a Goodman style handle. I made this to replace the broken mount on my Dive Rite handle. My Dive Rite light heads have an external diameter of 45mm and my lighthead mount had in internal…
A simple Goodman handle that you can print and use for your diving lamp. Just add two M6 screws, nut and washers and it's good to go. You have five M4 countersunk through-holes to attach a mounting plate for your specific lamp. Update…
The best torch handle for technical dives. Material - PETG Nozzle - 0.6mm Layer height - 0.3mm Infill - 60%
I wanted to give a try to the Goodman handle concept so I designed one to go with my new Sofirn SD01Pro dive light. Also, having a GoPro like camera I added a foldable arm to be able to jump into water with the light (and camera) hanging…
Goodman handle for my VTL3500P BigBlue dive torch. Additional material: 3x screw M3 x 15mm 3x washer M3 12x1mm 2x washer M3 10x1mm 2x injection nut M3 See my bungee mount for this torch:…
Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…
I have created a Goodman handle for the lamp Sofirn SD01 and also SD09L. The width of the handle inside is 105mm. I used this great model as a source of ideas: https://www.printables.com/de/model/85131-goodman-handle-for-sofirn-sd01 The…
My wife hated the SD01 because it is too bulky and heavy. Then I watched a video about ISE Alien light … of course, why not use two of our backup lights as a single primary! The burn time of SD05 is plenty for our dives. The beam of SD05…
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
This is a goodman handle designed for the XTAR D26 diving flashlight - it may also fit other models. You will need an M6x20-22 stainless steel bolt and a spring washer. You will also need some 4mm bungee cord. I prefer to print it with ~5…
GoodMans Wireless XE Headphones (Hinge Fix) So you broke your headphones, in the words of the Hitch Hikers Guide to the Galaxy ‘Dont Panic’ This model will replace the entire top band to which the hinges are part of. Although they are…
A handle similar to a Goodman handle for inexpensive XTAR D26 torch for diving.
PS1 style USB cover based on Jeff Chen's original design, modified to fit Goodmans USB-C 2M cable in grey.
From scratch re-design of @Stefa , I made a quite a few reconsideration and refinement for my design. The idea is to release the CAD files so by modifying the parameters one can make one's own goodman handle by measure. Enjoy.
The goodmans wireless charging pad proved to be a bit slippery. This solves the problem and provides a stand too. Originally I uploaded to thingiverse. Fusion 360 file included
Handle for Wurkkos SCUBA dive light. Will need small amount of bungee cord as a wrist strap. Handles included for DL30 and WK20 Lights found here (No affiliation, not an affiliate link)
A lithophane depicting Saul Goodman. It becomes a very high-detail image once you shine a light behind it, whether it's your ceiling lamp or you've put it on an outside-facing window (during the daytime, at least). Everyone loves Saul!…
This is a Goodman Handle with bungees for the Sofirn SD01. The design has already been tested over months and found to be good. In the back, another bungee is pulled through the lamp to fix the rear part on the arm. Feel free to leave a…
This is a redesign of the “PRO FLASH MOUNT” for the GOODMAN ZONE, which now fits a SMALLRIGH Cold Shoe 1241 properly, and also still has the bubble level. The Sides have also been shortened a bit, so that you can pass bungee cord from the…
While building my GOODMAN Zone, i found out that the DeWalt TLM30 Laser Rangefinder, which is mentioned and shown all over the project, and for which a mount is provided, is now End-Of-Life and has been replaced with the DeWalt TLM40 -…
This is a 3D printable goodman handle used by divers carrying a canister light. Can be adjusted so it accomodates drygloves and neoprene gloves. I have uploaded a version for the MARES DCT series and for Greenforce lights, feel free to…
Created as a fix for a guy doing a course, still not broken I believe.
A bust of Saul Goodman from the Better Call Saul TV series. AI-Generated on Makerworld.com.
Goodman handle for backup-lights from Polaris, Dir-Zone and Scubatech-Tekline. The holes are for 5mm bungee-cord. Feel free to use the scad-file to remix ist. Category: Sport & Outdoors
I wanted a waist level finder for my printed Goodman Zone v1.0 but there wasn't one available. This works with 4xM3 hex bolts utilized in other areas of the camera build along with magnets sourced from my local hardware store and a…
A goodman style handle with bungees. Different adapters can be added to the handle to securely attach your dive torch. The adapter is attached using four 3x6mm hex bolts like these…
This is a simple adjustable goodman handle for the Nanight Tech 2 dive torch. Printed in PETG with 4 walls and 80% infill.
I wanted to have a Goodman handle for my SoFirn SD-05. So I created this model. Any other 26mm light can be clamped as well. Solidworks files are included, so if you want to make one for a different diameter, be my guest. Just make sure…
I found the provided hot shoe mod to be too loose for my comfort, so I designed this hot shoe to hold my 50mm finder more securely.
This thumb loop is designed for the DiveXtra HP-1200 and HP-1800 dive light. The thumb loop makes it easy to move the light from one hand to another. The thumb loop gets mounted to the handle by using line or bungee cord and running it…
Needed Hardware: 4mm Bungee Cord 4x 3mm M3 Bolts (stainless) 4x 3mm Heat-Set Inserts Print Instructions Print Bottom Half in PETG (or similar) with >5 walls. No supports Print Tpp in TPU 98A (or PETG alternatively) with 8 walls
A universal lamp holder for the hand. Update: In version 2, the thickness was increased so that the nodes are completely hidden in the holes. Category: Hobby
The CINEZONE by Dora Goodman for the GOODMAN ZONE is supposed to be mounted with magnets and M3 bolts, which unfortunately don't provide that much stability as their contact surface is between two parts. These brackets improve the…
Der Goodman dient als Ersatz für den Alu-Godman der mitgeliefert/von mir mitbestellt wurde. Der originale Godman funktioniert klasse, allerdings habe ich mir am offenen Ende mehr als einmal ein Seil, einen Schlauch oder eine Leine…
Simple good man handle designed to use 3x Orchatorch D520 Lights or equivelant sized lights. You will also need some M6 Hardware for the handle and some M4 hardware for securing the lights. https://www.orcatorch.com/product/D520.html
A custom designed mount for two BlueFire 1000 Lights. Additional Hardware Needed 2x M6 Bolts, Nuts, Washers 2x Rubberbands .75" Velcro Category: Sport & Outdoors
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Saul Goodman, the iconic…
Bungee Goodman Griff für Wurkkos DL08 - Tauchlampen Halterung damit die Hände frei sind, Material: PETG Abmessungen: 60 x 50 x 11mm Drucker: Anycubic Kobra X
A template for making the pinhole for the Goodman Scura 6x6 camera. I used a very fine needle to make just dent the other side of the metal, and traced around it with a fine tipped sharpie.
Print with: 7 perimeters no infill no top or bottom surfaces TPU ~98 sore hardness (e.g. Extrudr Flexible Medium)
Follow the guide in Mr. Goodmans model.
A goodman style handle with bungees. Different adapters can be added to the handle to securely attach your dive torch. The adapter is attached using four 3x6mm hex bolts like these…
Der Goodman dient als Ersatz für den Alu-Godman der mitgeliefert/von mir mitbestellt wurde. Der originale Godman funktioniert klasse, allerdings habe ich mir am offenen Ende mehr als einmal ein Seil, einen Schlauch oder eine Leine…
The coil sits on top of the furnace and can be glued into place. Optional intake and flue pipes can also be printed to add some details. 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with…
GoodMans Wireless XE Headphones (Hinge Fix) So you broke your headphones, in the words of the Hitch Hikers Guide to the Galaxy ‘Dont Panic’ This model will replace the entire top band to which the hinges are part of. Although they are…
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
This was printed on an Ankermake M5C using Anker PLA+ Basic white filament and .4 nozzle. Printed it laying on its back, face up. It took about 90 minutes and 35g of filament. Then I painted it with some of those paint pens and it is…
The coil sits on top of the furnace and can be glued into place. Optional intake and flue pipes can also be printed to add some details. 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with…
