1 / 3
Josef Prusa spoolholder cap for Prusa XL and CORE One+ — image 1
1 / 3

Josef Prusa spoolholder cap for Prusa XL and CORE One+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spoolholder Cap with Josef Prusa

Rating
0 / 5
Likes
6
Downloads
5
Makes
0
Views
25
Reviews
0

Updated at source:

Model information

License
Open Community License v1.1

Remixed spoolholder cap, featuring Josef Prusa.

I made several versions and test prints. It can be printed face up without supports, but I recommend downloading my ready to print 3mf file for Prusa Slicer. I have changed some settings to make it print better, including lower bridge speed and thicker bridges. I also painted on supports under, just in case. I also added a color change at layer 81 (11.2 mm). If you don't have MMU or INDX, you can swap filament manually here.

I used a 0.4 mm nozzle, and the result turned out well. But a smaller nozzle diameter would probably be even better.

There are two versions, as you can see in the pictures.

The caps can be fitted on this spoolholder: https://www.printables.com/model/1755506-prusa-spoolholders/files

Tags