1 / 3
Josef Prusa spoolholder cap for Prusa XL and CORE One+ — zdjęcie 1
1 / 3

Josef Prusa spoolholder cap for Prusa XL and CORE One+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spoolholder Cap with Josef Prusa

Ocena
0 / 5
Polubienia
6
Pobrania
5
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1

Remixed spoolholder cap, featuring Josef Prusa.

I made several versions and test prints. It can be printed face up without supports, but I recommend downloading my ready to print 3mf file for Prusa Slicer. I have changed some settings to make it print better, including lower bridge speed and thicker bridges. I also painted on supports under, just in case. I also added a color change at layer 81 (11.2 mm). If you don't have MMU or INDX, you can swap filament manually here.

I used a 0.4 mm nozzle, and the result turned out well. But a smaller nozzle diameter would probably be even better.

There are two versions, as you can see in the pictures.

The caps can be fitted on this spoolholder: https://www.printables.com/model/1755506-prusa-spoolholders/files

Tagi