1 / 3
MKS3+ Dual Filament Guide — image 1
1 / 3

MKS3+ Dual Filament Guide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip on dual filament clip for the MK3s+ and any other models that use the same injection molded filament holder.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I created a new model and used the base dimensions from JCOENG's design. I increased the thickness of the clip to reduce the chance it will break when being installed 2nd position up. I also reduce the height of the guide area, and sloped the transition to the clip for added strength. This means it uses less filament and prints a bit faster while still being stronger.

I printed in PETG, 0.2mm Layer Height, 30% standard Gyroid infill pattern in PrusaSlicer 2.9.6. Orient Flat side down, no supports needed.

It will fit on an MK3S+ and any other Prusa printers the use the same injected molded spool holder.

Tags