BoostGro Vertical Light Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: BoostGro_socket_fit_test_0.4n_0.2mm_PLA_COREONEL_19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of the Utilitech grow light stand for the BoostGro 46.1-in model found at Lowe's
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The BoostGro LED grow lights were available and cost-effective at my local Lowe's, and I liked the design of the light stand. The pictures will show that either end of the grow light can be fitted in, and it is possible to daisy chain the lights using either end in the stand.
I've included a fit test to save time and materials to give you a feel for how the light fits.
I recommend using the 3mf files over the stl files. The 3mf files adhere to the measurements and print at a 160mm x 160mm space on the bed. The stl files are included for reference if someone wants to make changes.
Lowe's light info:
BoostGro 46.1-in 1 -Light White 30 -Watt Full spectrum LED Grow light kit
Item #6904543 | Model #GCS46WHTA1
AI-assistance:
Model used was GPT6-Astra, connected to Blender via the Blender MCP add-on.