Motorcycle Turn Signal Clamp for 33mm Forks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed clamp for mounting turn signals to 33mm motorcycle forks.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
I made this fork clamp because I needed a clean way to mount turn signals on my old KZ440 and couldn't find a good option. The available commercial parts were either inexpensive-looking universal clamps or more premium options that were hard to justify.
This design fits 33mm motorcycle forks and uses standard hardware:
3D printed clamp body
M3 heat-set inserts required
M3 socket head cap screws required
Despite being printed in PLA, this part has held up surprisingly well after more than 2.5 years of installation. Your results may vary depending on climate, print settings, and exposure, but it has exceeded my expectations.
Print Notes:
Material: PLA tested
Heat-set inserts: M3 brass inserts
Hardware: M3 socket head cap screws
Orient/print settings may vary depending on your printer and material choice
Designed for personal use on my own motorcycle. Verify your fork diameter and hardware before printing.