Prusa Telescopic Spoolholder Caps with numbering and or position indicators
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Caps for the telescopic Prusa spool holder, featuring customizable visible information, coloring, and numbering.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 1
- Views
- 43
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1.1
Caps for the telescopic Prusa spool holder, featuring customizable visible information, coloring, and numbering.
Caps with the correct vertical orientation (It shouldn't need mentioning, but there are many caps on Printables with wrong orientation)
Why is there a double indicator for in/out position: The Spoolholder can be in switch 1-2 Kg (movable) position or fixed position, which leads to two possibilities for inserting and removing the spool holder.
Fits Telescopic Spoolholder of CoreOne+ CoreOne+ INDX and XL Printers with universal puck.
Use Prusa Slicer to choose your design. Each character/symbol is listed separately, choose your preferred coloring. If you would like to make any info invisible, choose the same color as the cap color. See example below.
Recommended print settings:
0.4 nozzle or smaller if available
0.15mm Detail
no supports
How to remove the cap from the Spoolholder:
Use a stick with at least 110mm length and 6-12mm diameter and flat headsides
Push the stick through the hole on the backside of the spool holder until it touches the cap
Put the assy onto a table with the stick on the table and push the spool holder gently downwards until the cap comes off