Ball Mount with AMPS Plate - Fully Parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully parametric model to mount devices with a ball socket (phone chargers, GPS, etc...) to an AMPS or similar bracket.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric model for a ball mount on a plate with a reinforcing bolt to add strength and reduce sag.
Commonly used to mount electronic devices for automotive, cycling, boating, etc...
Compatible with 4-bolt AMPS hole pattern (30 x 38 mm) but also customizable for any hole pattern. Uploaded models have a standard 17mm ball, though this can be customized as well.
The uploaded .stl files are examples, with additional options available by downloading the Fusion 360 file and modifying the parameters. Customization options include:
Mounting hole pattern, hole diameter, and margins to edges (which define the plate size)
Mounting post height and position on the plate
Mounting ball diameter
Reinforcing bolt length, diameter, and nut size
ASA recommended for vehicles due to better heat and UV resistance.