Print-in-Place Wyvern - Wings and Two Legs, Fits A1 mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated wyvern (16 vertebrae, wings, jaw, two legs) that prints in one piece, coiled to fit an A1 mini. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Articulated wyvern (16 vertebrae, wings, jaw, two legs) that prints in one piece, coiled to fit an A1 mini. No supports.
16 hexagonal vertebrae with vertical pin hinges (0.4 mm clearance)
Wings print flat on the bed and lift 0–44°; opening jaw; one pair of legs, like a true wyvern
Printed coiled (14° per hinge): 157 × 160 mm at 100 %
Same family as the Mechanical Dragon, Baby Dragon and Sea Serpent
Print settings
A1 mini and any bed ≥ 170 mm: 100 %, 0.20 mm, PLA, no supports: about 1 h 42 min, 37 g (Bambu Studio project included). The roof of the mouth is the only overhang. After printing, flex each joint once starting from the tail.
About this design
Checked for overhangs and bed fit, and sliced in Bambu Studio before release. Pictures are 3D renders. Makes and feedback welcome.
Español
Wyvern articulado de 16 vértebras con alas, mandíbula y dos patas, de una pieza y sin soportes; cabe en el A1 mini al 100 % (157 × 160 mm): 1 h 42 min, 37 g.
العربية
وايفرن مفصل من 16 فقرة بجناحين وفك وساقين، يطبع قطعة واحدة بلا دعامات ويتسع على A1 mini.