Wall Art - Flowers 014
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elegant floral wall art with flowers, leaves and stems – perfect for warm modern interiors, bedrooms and living rooms.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
🌸 Floral Wall Art
Bring a soft and elegant touch of nature into your home with this decorative Floral Wall Art. 🌿✨
The design combines several large flowers with flowing stems, leaves and smaller botanical details to create a clean and timeless wall decoration.
Its vertical shape makes it especially suitable for narrow wall areas, next to shelves, doors, cabinets or as a decorative centerpiece above a console.
It works beautifully in:
🌿 Living rooms
🛏 Bedrooms
🚪 Entryways
🛋 Cozy reading areas
🖥 Offices
🌸 Botanical interiors
🎁 Gifts for flower and nature lovers
Printed in matte black PLA, the design creates a strong but elegant contrast against white, beige or warm-colored walls.
✨ Features
Elegant floral and botanical design
Three large decorative flowers
Detailed leaves and branches
Beautiful vertical format
Clean silhouette appearance
Lightweight wall decoration
Easy FDM print
No supports required
Easy to mount
Fully scalable
Looks especially beautiful in matte black PLA
📏 Model Thickness: Approximately 3 mm
📐 Scaling
The model can easily be scaled directly in your slicer.
Because there are several smaller leaves, stems and flower details, I recommend printing it larger rather than smaller.
Larger prints will make the smaller details cleaner and also give the wall art a much stronger visual presence.
Keep the original proportions when scaling.
🖨 Recommended Print Settings
Printer: FDM / FFF
Material: PLA recommended
Nozzle: 0.4 mm
Layer Height: 0.28 mm
Walls / Perimeters: 2
Infill: 15%
Infill Pattern: Rectilinear
Model Thickness: Approximately 3 mm
Supports: No
Brim: Usually not required
Raft: No
Print Orientation: Flat on the build plate
Cooling: 100% after the first layers
Wall Generator: Arachne or Classic
Outer Wall: Up to 250 mm/s on capable high-speed printers
Inner Wall: 200–300 mm/s
Infill: 250–300 mm/s
Top Surface: 150–200 mm/s
First Layer: 30–50 mm/s
💡 Print Tip: Printing the visible side face-down on a textured PEI plate can give the front a beautiful and uniform textured finish.
🛠 Mounting
For mounting, I recommend double-sided mounting tape.
The model is lightweight, so only a few small pieces are normally necessary. Place them behind some of the larger flower and leaf sections for secure attachment.
Make sure the wall is clean and dust-free before mounting.
🖤 My recommendation: Matte black PLA on a warm beige wall looks especially elegant and gives the floral design a really premium appearance.