LTM 1055-3.3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Liebherr LTM 1055-3.3 (1:50 Scale Mobile Crane) A 1:50 scale model of the Liebherr LTM 1055-3.3 all-terrain
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Liebherr LTM 1055-3.3 (1:50 Scale Mobile Crane)
A 1:50 scale model of the Liebherr LTM 1055-3.3 all-terrain crane. Designed with operational display features in mind, this build includes functional telescoping sections, realistic locking mechanisms, and an optional North American–style boom dolly.
Key Features
Extended Reach: Full boom extension reaches nearly 3 feet (approx. 90 cm).
Realistic Pinning Locations: Boom sections feature dedicated pin holes for standard extension stages (0%, 46%, 92%, and 100%), locked using M3 grub screws.
Functional Luffing Cylinder: Designed to house a 3.5 mm brass tube or solid rod insert, allowing an M3 grub screw to securely lock the boom at various elevation angles without crushing printed parts.
Winch & Pawl System: Working winch mechanism with an integrated ratchet/pawl to keep hoist lines tensioned.
Ballastable Counterweight: Hollow counterweight module designed to hold added weight (such as lead fishing sinkers) for improved stability while rigged.
Transport Configuration: Includes a detachable North American–style boom dolly.
Hardware Requirements
Fasteners: M1.6 to M2 machine screws (assorted lengths) for chassis, cab, and mechanical assembly.
Set Screws: M3 grub screws for boom section pinning and cylinder angle locking.
Reinforcement: 3.5 mm brass tube or solid rod for the luffing cylinder piston shaft.
Ballast (Optional): Lead shot or fishing sinkers for counterweight fill.
Line: Braided fishing line or fine rigging thread for hoist cable.
Printing & Assembly Notes
Skill Level: Advanced. Fine-pitch scale features and tight operating tolerances make this a challenging print and build.
Post-Processing: Due to close tolerances, light sanding and deburring are required on telescoping boom sections and outrigger beams for smooth sliding action.
Slicer Settings: Pay close attention to wall-generation settings (Arachne recommended) to ensure thin structural walls and fine details are not omitted during slicing.
Fitment: Test-fit sliding and pivoting assemblies before final fastening or gluing.