1 / 4
PTFE tube Y splitter (horizontal lengthwise cutter) - for snap-off blades
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses a blade segment from 18mm snap-off utility knife blade to split 4mm PTFE tube lengthwise
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 1
- Views
- 94
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed to cut some PTFE lengthwise and had 18mm utility knife snap-off blades. So I designed this gude that uses one segment of a blade to split PTFE along it's length.
Two parts can be fastened together with 3 pairs of M5 bolts and nuts. If you don't have those on hand - there is a model for a "ring" you can pull on top of the two halves to hold them in place. It's better to print at least 2 of these rings.