1 / 2
NOVELTY | Gum Dispenser – Basic Edition — image 1
1 / 2

NOVELTY | Gum Dispenser – Basic Edition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-in-place flip-top sheath (single print) that snaps onto gum bottles. No assembly, reusable.

Rating
0 / 5
Likes
11
Downloads
9
Makes
1
Views
237
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

A single print sheath with a hinged flip-top lid that gives ordinary chewing gum bottles a clean, minimalist look. 

No assembly, screws, glue or tools required.

Please don't scale this model. The snap fit is tuned to the standardized bottle neck, so scaling will break the fit.

Looking for the chic version, then check here.

Have fun!

Compatibility

Tested with:

  • Airwaves, 46-piece bottle

  • Wrigley's Extra, same-size bottle

  • Orbit, same-size bottle

Print settings

Setting

Value

Layer height

0.15 mm

Supports

Support on build plate only. 
Style: Snug
Top contact Z-distance: 0.26 mm
XY-seperation: 300%

Infill

15 %

Material

PLA, PLA+

Orientation

Upside down (rotated 180° from its position of use), lid open

Installation

  1. Remove the original lid from the gum bottle.

  2. Slide the sheath over the bottle from above.

  3. Press down until the sheath snaps into place.

  4. Press the lid shut. A wedge-shaped lip on the inner rim of the lid grips the outer edge of the case and keeps the lid closed.

When the bottle is empty, pull the sheath off and snap it onto the next one.

Tags