Shelf Support Pins 5 mm (set of 8)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shelf pins for 5 mm holes with a 12 × 10 mm ledge. Printed lying down on a flat face for strength.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Shelf pins for 5 mm holes with a 12 × 10 mm ledge. Printed lying down on a flat face for strength.
Pin Ø4.85 × 9 mm with a chamfered tip
Ledge 12 × 10 × 5 mm
Layers run along the pin, not across it
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 15 min, 6 g.
For light and medium loads; use PETG and 100 % infill for books.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Pines de estantería para agujeros de 5 mm, juego de ocho. Sin soportes: 15 min, 6 g.
العربية
مسامير رفوف لثقوب ٥ مم، طقم من ثمانية.