Try Square 100 mm with 45° Miter Edge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small try square: 12 mm stock, 100 mm blade with a 1 mm scale and a 45° edge for marking miters.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Small try square: 12 mm stock, 100 mm blade with a 1 mm scale and a 45° edge for marking miters.
Blade 100 × 30 × 3 mm, stock 70 × 12 × 12 mm
Engraved scale every 1 mm
Prints flat: blade and stock are one piece
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 23 min, 14 g.
Check it against a known square once printed; sand the stock face if needed.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Escuadra de carpintero de 100 mm con canto a 45°. Sin soportes: 23 min, 14 g.
العربية
زاوية نجارة ١٠٠ مم مع حافة ٤٥°.