3,335 models
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
UPD: JAN - added models without led bar, without screen (for regular and hidden bolts) Hello community! Like many of you, I was shocked by the weakness of the frame and made some attempts to fix it. Adding dampers under the printer -…
Can be printed with any Prusa you like. Will be printing mine in transparent PETG when it comes in, but I suppose any filament will do. Keep in mind the natural wear and tear over time, and water contact if using near a sink. Longer print…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Summary In an attempt to reduce ghosting on prints, especially evident when printing at high speed, I have design a fully printed gantry support. The support mounts to the gantry and base using existing screws (no modification to the…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
This next test involves turrets. You remember them, right? They're the pale spherical things that are full of bullets. - GlaDOS Dont worry, 3d printed parts cannot shoot bullets or sing a song… yet. Here you can download and print your…
FULL BUILD GUIDE FOUND HERE Contains all information about building the turret, including a BOM. DISCORD HELP SERVER FOUND HERE Find me and others who have built the turret and are here to help.
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
Greebles! Entry panels, hatches, and more! No support required Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff: Construction: Building under…
The G4 stryker (throwing) knife also seen in CSGO. Tried to keep the dimensions as close to the real life counter part as possible but couldn't find all of them.
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
stryde · planter modern minimalist design with patterns that sits elevated on a wrap around drip plate dimensions in mm: 80m height version ~ x: 94 · y: 94 · z: 80 100m height version ~ x: 118 · y: 118 · z: 100 photos show printed in wood…
This model is a specially designed X Carriage Leveling Support for Elegoo Neptune 4 Pro 3D printers. It is crafted with the purpose of ensuring accurate leveling on the Z-axis. Mounted under the X-axis carriage, this support provides…
QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
For all information and recent models look at https://www.thingiverse.com/thing:6516352 .
A small stencil for drawing organic molecules. Includes: - Pentagon - Hexagon - Heptagon - 1-10 Carbon chain - Chair - Newman projection for cyclohexane Use a fine point pen/marker Makeworld:…
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
V Slot Gantry Plate for 2020 extrusion with 5mm holes. Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: self made PLA 1.75 Gray Notes: V Slot Gantry Plate for 2020 extrusion. stl of V slot…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
This is an insert for Tapestry, including all three of its expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys). Here are some of its features: Gives each landmark mini its own custom-shaped storage location. Supports…
A helpful tool to get the gantry aligned in a dual-Z configuration. Put printed tools on both sides of the gantry Disable steppers Move hotend to the middle of the printing area to avoid collision Manually, simultanously rotate both Z…
These are some keychains made to look like the default icons from the game Geometry Dash by RobTop. I printed these with PLA, but other materials should work. You will need to add a color change while printing to make the outline and…
Remixed from m*bergman's excellent Stryker lineup, which is in real life a remix of the GDLS LAV 3. The LAV 6 ISC is the latest in-service version of the mowag piranha lineup, which entered service in 1974. (…
I had an issue like many other with the X gantry on my neptune 4 max got out of wack from shipping. This will help you to realign the X gantry.
This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide…
A simple organic chemistry stencil, intended for those learning about skeletal form of representing organic chemistry structures. The stencil is small, and prints very quickly, using minimal material. I intentionally did not include…
To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
Für das Kabel des GSensors. Zum sauberen Durchführen nach hinten. Kompatibilität zu SE und KE Ihr benötigt 1 weiteres Teil: Ender 3 V3 SE Spine cable Clamp to Spine by @ Adrian@3DPrintMasters Für die komplette Verkleidung benötigt Ihr…
This is a static model about 40cm high with room for electronics, it is the same size as this movable tracking model from which also contains instructions on how to make the legs:…
MODEL DETAILS E3D's geometry for flow rate testing as used in-house. Read more about this here . DESIGNER Designed by James Clive-Smith. Check out E3D!
This is my take on the mini sentry from TF2. While the model is mostly 3D printable, it has been designed with laser cut steel plates in the base for extra stability and strength. DXFs have been included. Bill of Materials Check out the…
3D printed arms for holding gantry level and in place. 4 avalible versions spanning from 100mm to 250mm Its recommended to print 2 arms per side totaling 6 arms for Voron 2.4 gantry Lower end of the arm is 3mm wider so it does not touch…
Voron 2.4 / trident 9mm belt gantry u'll need to think 8-10mm longer on every bolt. been using this on my 8 machines for a year now…time to share you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Simple cinder blocks designed for aesthetics and 3D printing. Created with AI-assisted OpenSCAD modeling and released under a Creative Commons Attribution 4.0 license. Feel free to remix, reuse, and customize. If your slicer supports it,…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
More than a year ago I printed a tf2 sentry (the red one in the pictures) and while it is really cool, having to glue everything was pretty tedious. Over time it also has completely fallen apart. After a lot of procrastination I've…
UPDATE: Please check out the SATURN V - COLBY CRANE by ChristineZ_42 https://www.thingiverse.com/thing:4222791 for a highly detailed replacement for the gantry crane!! The Saturn V (spoken as "Saturn five") was an American human-rated…
This handy organizer holds the standard soup cans that measure 4 3/8" (113mm) by 3" (75mm). Each assembled organizer holds 11 cans. Use the different connector types to form a stackable version if your shelving has extra space. Fully…
This is not my model - it is model of Senesi published on Thingiverse (https://www.thingiverse.com/thing:690891)
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
Use this simple and easy to print tool to upgrade your chemistry drawings! Print with normal settings. The better your first layer the better the print will turn out… There are two sizes, the original size (pretty big…just there for…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
I designed these for a friend who was looking for a bidet spray attachment that could be attached to a Smartwater bottle to be used while backpacking. I have included several variations where I have varied the size of the slot or spray…
This is a wall-mounted quilt hanger, based on a wooden design I've seen. It's simple, requires no supports, does no damage to the hanged item and looks great! All pegs can be used with all versions. V1 Simpler, and does not include hole…
Got tired of looking for my Cutters every spool change… Now I got a spot for them I can't miss.
Display holder for Creality Ender-3 V3 SE or KE (with 2 pins). Remix for the gantry support (right bottom part).
Use these 1250 names together with “ fridge poetry ” to create some refrigerator messages or poetry: Just print the names with a filament color change, slide in a 8x1mm magnet from the bottom (it sticks without glue) and have fun!…
Set of WWII-style infantry soldiers in dynamic combat poses, ideal for wargames, dioramas and military scenes.
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
Sacred Geometry Lotus Motif: Geometric Wall Art Anahata - 8 Petals - Heart Chakra.
I originally modeled this a few years ago, after the companion cube from the portal series, and I recently went back and remade this version. It's best printed on an SLA printer due to the high detail of the model. This is fitted for a…
The original model by MakerTom didn't suit me at all, as I use a rain water tank pump for watering, which has a lower water pressure than has water supply line. The original jet had a throw distance about 1.5 meters with the pump.…
Modular LED channels for hexagonal acoustic (or 3D printed) panels. The channels are designed to be printed with 0,4mm nozzle. Assembly material: Hexagonal Acoustic Panels 30cm x 26cm 3D printed Channels LED Strip: Minimum 60 LED/meter (…
French Curve Set 3D-printable school utility set for drafting conic sections. Contains: Elipse Hyperbola Parabola Printing this set is more affordable than buying it. Scale it if you need larger or smaller versions. I made myself a few…
Note: This is a prototype! A lucky little Robot Sentry, Number 13, has arrived to defend your desk from the evil AI of rogue Dummy 13 androids. Will the storm of electro-magnetically-propelled incendiary steel rounds stop the attack? Will…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Update - 2/7/26 Added WITH_WIRES_Mini_Robot_Print_PLA_White_v1.1 due to a mess up with the previous upload. Update - 2/21/25 Scaled the eye down slightly so it is an easier fit. Changed the tolerance of the guns to be looser. Print…
I couldn't find my tapestry needle to finish my fair isle knitted project, so I made my own. I print it in 0.20 speed, 20% infill and no supports and it comes out great. Sand the tip to make it sharp. A bit of sanding overall is…
Put some motion in your build with a precision milled gantry plate designed for any 20mm side of V-Slot Linear Rail.
I made this model because I didn't like my umbilical going to the A drive bracket as it was too close to my Z belt, and meant I needed a longer wire run. The other reason was so that I could remove my remaining Z cable chain and simply…
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
Our universal gantry plate is suitable for many build designs. 3D printing extruders, diode lasers, plasma heads are just some of the possibilities.
The Organic Chemistry Stencils that I was able to find on 3d printing websites all had some issues when trying to use them. Either the Newman projection angles were not 45' into the plane, or the Chair Conformation angles were incorrect,…
Easy to print 0.2mm layer .5mm perimeters (0.4 mm nozzle) 25% infill
A revamped version of this cute little model by Riddellikins. Some parts need to be mirrored in your slicer. The structural stability has been improved by locking the rotation of the main pivoting leg assembly. Feet and center mast are…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
Metatron cube turned into Ornament. Made in Blender using tessellation (Tissue add on) and Cast.
I have a lot of vertical space inside cabinets that is often wasted. With this rack I can stack things and more efficiently make use of that space: Things placed on top of the rack are easier to see and reach given that they're up high…
No supports are needed!!! This is the official periodic table of ELEMENTS! All the elements, Hydrogen to Oganesson, all 118, are on the stl. file. This is a great present for a science teacher or someone who loves science! (It was mostly…
0.4mm nozzle -QUALITY- 0.08 Layer height Ironing Type - All Top Surfaces -STRENGTH- 5% Infill Gyroid infill pattern -SUPPORT- Enable Tree supports auto
Poultry Water Pot Tower I used supports on the base part, but they were difficult to remove. For the tower I used slim tree supports.
A WW2 US soldier in Normandy. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and…
Matryoska-like toy as a reminder for the last nontraditional Easter Print instructions 0.2mm without supports the upper parts can be centered on one place for most effective printing.
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Two stores Victorian Country House. I modeled the house as the main project for this amazing course: https://www.domestika.org/es/courses/1544-diseno-e-impresion-3d-de-maquetas-arquitectonicas/course I found the blueprints from a real…
Staying clean in the backcountry is vital to keep moving in comfort. With the backcountry bidet, you can keep the most sensitive parts of your body pristine and clean. Simply screw on to a water bottle, invert, aim, and gently squeeze!…
The LAV III Kodiak is a GDLS development of the Mowag Piranha initially introduced in 1974. This lav 3 is a remix of the excellent m bergman's Stryker vehicle lineup, which is itself in real life a remix of the GDLS LAV 3 lineup! I've…
By choosing the right colors and adding personalized text, this set is perfect for back to school and makes a great starter gift. This package includes: - Ruler - Protractor - drawing triangles Ruler dimensions: L 160 mm x W 30 mm x H 3…
The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.
Scale parts to 2.63% for 1:87/HO/OO/1.65mm gauge Two ladle variants - a smooth variant similar to most commercial models, and a vented "pumpkin" ladle. x4 locking arms/pins are optional
This is a 3d representation of the 2d Metatron Cube and its Sacred Geometry. It is also broken down into its parts, so you may explore its possibilities.
Ender 3 v3 SE KE Z Gantry support Without drilling+ Raise the screen
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
Variation on Spiral Fidget Don't forget to give me a like 🧡 Share photos of your prints 🪆
Printing instructions So far I have printed this model up to a size of 40% scale of the upload. At that size, it was already sensible to support the middle of the belly with some support. But I do not recommend support at the head or the…
Modelled as closely to the original as I could, while optimizing for printing. Arms open & close. PLEASE READ: You will need a small length of sturdy wire to attach the legs, unless you are printing the solid resin version. I used the…
12.02.2023. sapphire new version v3 finally go time to print all parts, not just virtually check in fusion 360. Now one of last version 3 is out and belts finally are parallel. p.s. Some printers can be different sizes, gen1, gen3, and…
Tired of searching for screws and small items in various jars and containers? This 3D-printed organizer is the solution! Easy to Use: Simply pour the contents of the jar into the organizer for a neat and organized setup. Special Funnel:…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
