Voron 2.4 / trident 9mm gantry

Voron 2.4 / trident 9mm belt gantry

u'll need to think 8-10mm longer on every bolt.

been using this on my 8 machines for a year now…time to share

you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print head you will need 4 f695 too.

right motor is upside of motor mount so no cable chains can be used, had umbilical/canbus in mind designing this. plus less strain on the motor shaft with the pulley closer to motor body.

240329
now also tested with archtype core
 
240203
not maintaining stls anymore

231002
fixed trident front idlers hole spacing.

230917
cleaned up some more
made some holes bridgable
fixed xy joints lower 30mm bolts bottomed out in extrusion. 
thanks @johan/alucardi on discord for noticing.
(only stepfile updated, not stls)

230914
added trident A/B drives and front idlers

230911
fixed some alignment issues and cleaned up some models.
also uploaded the right step file….doh 
added xol carriage
added bfi idlers
added dragonburner carriage

credits to

www.vorondesign.com
https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers/Voron%202.4
https://github.com/Armchair-Engineering/Xol-Toolhead
https://github.com/clee/VoronBFI
https://github.com/mandryd/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015
https://github.com/chirpy2605/voron/tree/main/general/Large_Voron_Mounts