Burger Press Ø110 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ring and plunger for even 110 mm burgers about 15 mm thick. Two parts, no supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ring and plunger for even 110 mm burgers about 15 mm thick. Two parts, no supports.
Ring Ø110 × 20 mm
Plunger with a 0.6 mm gap and a knob
Knob flares at 45°
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 22 min, 18 g + 51 min, 33 g.
For food contact use a food-safe filament, print fresh and wash by hand.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Prensa de hamburguesas de 110 mm. Sin soportes: 22 min, 18 g + 51 min, 33 g.
العربية
مكبس لتشكيل البرغر ١١٠ مم.